Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

Ryobi String Trimmer Fuel Filter Replacement #310976001

01:53
3.4k
16
This video provides step-by-step instructions for replacing the fuel filter on a Ryobi string trimmer.

All of the information in this replacement video is applicable to the following brands: Ryobi

Step By Step Instructions

1
Ryobi String Trimmer - Model RY253SS
2
String Trimmer Fuel Filter Replacement
3
Hot Hazard
4
"Before you begin, confirm the engine has cooled."
5
Spill Hazard
6
Be sure to perform this procedure with little or no fuel in the tank.
7
Unthread the fuel tank cap and pull the retainer free of the tank.
8
You can use a wire with a hooked end to pull the fuel filter out.
9
"Slide the retaining spring away from the filter, then pull the old filter off of the fuel line."
10
Install the new fuel filter by first sliding the retaining spring toward the end of the fuel line.
11
Insert the filter port into the line so it is secured under the spring.
12
Push the new filter into the tank.
13
Reinsert the fuel cap retainer into the tank then thread on the cap.
14
Refill the fuel tank if necessary.
15
Congrats! Your string trimmer is ready for use.
Description
This video provides step-by-step instructions for replacing the fuel filter on a Ryobi string trimmer.

All of the information in this replacement video is applicable to the following brands: Ryobi
Step-By-Step Instructions
1
Ryobi String Trimmer - Model RY253SS
2
String Trimmer Fuel Filter Replacement
3
Hot Hazard
4
"Before you begin, confirm the engine has cooled."
5
Spill Hazard
6
Be sure to perform this procedure with little or no fuel in the tank.
7
Unthread the fuel tank cap and pull the retainer free of the tank.
8
You can use a wire with a hooked end to pull the fuel filter out.
9
"Slide the retaining spring away from the filter, then pull the old filter off of the fuel line."
10
Install the new fuel filter by first sliding the retaining spring toward the end of the fuel line.
11
Insert the filter port into the line so it is secured under the spring.
12
Push the new filter into the tank.
13
Reinsert the fuel cap retainer into the tank then thread on the cap.
14
Refill the fuel tank if necessary.
15
Congrats! Your string trimmer is ready for use.

Applicable Product Model

Parts Needed
Total$0.00

Related Articles & Videos