DescriptionThis video provides step-by-step instructions for replacing the flanged washer on a Ryobi string trimmer.
All of the information in this replacement video is applicable to the following brands: Ryobi
Step-By-Step Instructions1
Ryobi String Trimmer - Model RY253SS
2
String Trimmer Flanged Washer Replacement
4
"You will need a small flat-head screwdriver, "
5
Align the slot in the washer with the slot in the gear case and insert a small flat-head screwdriver.
6
You can now rotate the trimmer head clockwise to detach the head and remove the old washer.
7
"Install the new flanged washer by aligning it on the head, then thread the head on counter-clockwise."
8
"Align the slots, insert the screwdriver, then rotate the head to lock it into place."
9
Congrats! Your string trimmer is ready for use.