Frigidaire Electric Laundry Center Front Blower Housing Replacement (5304515916)

07:06
562
28
This video provides step-by-step repair instructions for replacing the front blower housing on a Frigidaire electric washer/dryer laundry center (model FFLE3900UW1). The most common reason for replacing this part is if the dryer is noisy.

This replacement video is applicable to the following brands:
Frigidaire

Don't forget to like and comment on this video and subscribe to our channel!

Step By Step Instructions

1
Laundry Center- Model FFLE3900UW1
2
Laundry Center Front Blower Housing Replacement
3
"Step 1: Gather a number two square drive bit and phillips-head screwdriver. "
4
Step 2: Unplug the power cord.
5
Step 3: Use the number two square drive bit or the phillips-head screwdriver to unthread the two screws securing the dryer's lower access panel.
6
Step 4: Pull the panel up to remove.
7
Step 5: Unthread the two mounting screws securing the control panel.
8
"Step 6: Pull the panel down to detach. "
9
Step 7: Release the wires from the retaining clip and move the panel out of the way.
10
Step 8: Disconnect the dryer door switch wire connecter.
11
Step 9: Unthread the upper left screw securing the inner access panel which will make it easier to fully remove the front panel and lint filter duct assembly.
12
Step 10: Use the phillips-head screwdriver to unthread the two lower screws securing the front panel.
13
Step 11: Unthread the four upper screws along the top of the cabinet.
14
"Step 12: With all the screws unthreaded, fully remove the front panel and lint filter duct assembly. "
15
Step 13: Unthread the rest of the screws securing the inner access panel.
16
Attention: Be aware that two of the screws securing the inner access panel.
17
Step 14: Set panel aside.
18
Step 15: Use the number two square drive bit or the phillip-head screwdriver to unthread the six screws holding the two halves of the blower housing together.
19
"Step 16: With the screws unthreaded, remove the old front half of the housing. "
20
Step 17: Align the new housing with the rear housing then thread the six mounting screws.
21
Step 18: Reinstall the front panel by positioning the lower portion of the lint filter duct behind the inner access panel as you align the front panel mounting pins with the holes in the cabinet frame.
22
Step 19: Rethread the four upper screws- it will be easier to replace the two middle screws first.
23
Step 20: Rethread the two lower screws.
24
Step 21: Rethread the upper left screw to fully secure the inner access panel.
25
Step 22: Reconnect the door switch wire connecter.
26
Step 23: Secure the control panel wires in the retaining clip then reposition the panel.
27
Step 24: Replace the mounting screws.
28
Step 25: Realign the access panel and secure it with the screws.
29
Step 26: Plug the power cord back in.
30
Congratulations! Your laundry center should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the front blower housing on a Frigidaire electric washer/dryer laundry center (model FFLE3900UW1). The most common reason for replacing this part is if the dryer is noisy.

This replacement video is applicable to the following brands:
Frigidaire

Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
Laundry Center- Model FFLE3900UW1
2
Laundry Center Front Blower Housing Replacement
3
"Step 1: Gather a number two square drive bit and phillips-head screwdriver. "
4
Step 2: Unplug the power cord.
5
Step 3: Use the number two square drive bit or the phillips-head screwdriver to unthread the two screws securing the dryer's lower access panel.
6
Step 4: Pull the panel up to remove.
7
Step 5: Unthread the two mounting screws securing the control panel.
8
"Step 6: Pull the panel down to detach. "
9
Step 7: Release the wires from the retaining clip and move the panel out of the way.
10
Step 8: Disconnect the dryer door switch wire connecter.
11
Step 9: Unthread the upper left screw securing the inner access panel which will make it easier to fully remove the front panel and lint filter duct assembly.
12
Step 10: Use the phillips-head screwdriver to unthread the two lower screws securing the front panel.
13
Step 11: Unthread the four upper screws along the top of the cabinet.
14
"Step 12: With all the screws unthreaded, fully remove the front panel and lint filter duct assembly. "
15
Step 13: Unthread the rest of the screws securing the inner access panel.
16
Attention: Be aware that two of the screws securing the inner access panel.
17
Step 14: Set panel aside.
18
Step 15: Use the number two square drive bit or the phillip-head screwdriver to unthread the six screws holding the two halves of the blower housing together.
19
"Step 16: With the screws unthreaded, remove the old front half of the housing. "
20
Step 17: Align the new housing with the rear housing then thread the six mounting screws.
21
Step 18: Reinstall the front panel by positioning the lower portion of the lint filter duct behind the inner access panel as you align the front panel mounting pins with the holes in the cabinet frame.
22
Step 19: Rethread the four upper screws- it will be easier to replace the two middle screws first.
23
Step 20: Rethread the two lower screws.
24
Step 21: Rethread the upper left screw to fully secure the inner access panel.
25
Step 22: Reconnect the door switch wire connecter.
26
Step 23: Secure the control panel wires in the retaining clip then reposition the panel.
27
Step 24: Replace the mounting screws.
28
Step 25: Realign the access panel and secure it with the screws.
29
Step 26: Plug the power cord back in.
30
Congratulations! Your laundry center should be ready for use.

Applicable Product Model

Washer/Dryer Combo
Model
Subtype
Product Diagram & Manuals
Parts Needed
Housing
Housing
$41.47
Total$0.00

Related Articles & Videos

10:24
33k
286
Part Replacement
Frigidaire Electric Laundry Center Heater Assembly Replacement (137392702)
07:04
35k
271
Part Replacement
Frigidaire Electric Laundry Center Dryer Drum Belt Replacement (134503600)
09:35
19k
158
Part Replacement
Frigidaire Electric Laundry Center Dryer Drum Bearing Replacement (131777700)
18:36
19k
154
Part Replacement
Frigidaire Laundry Center Washer Transmission Assembly Replacement (5304517318)