Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more

GE Dryer Inner Drum Slide Replacement #WE1M1067

02:22
73k
112
This video provides step-by-step repair instructions for replacing the inner drum slide, glide, or pad on a GE gas dryer. The most common reason for replacing the drum slides is when the slides are worn-out and the dryer is making noise.

All of the information for this inner drum slide replacement video is applicable to the following brands:
GE, Hotpoint, RCA, Americana

Step By Step Instructions

1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the screws at the rear of the control panel to release it.
3
Next, open the dryer door and remove the screws inside the door frame which secure the main top.
4
Now carefully slide the main top forward, unhook it from the control panel tabs and remove.
5
Uninstall the screws securing the front panel.
6
Now, lift the front panel up to remove.
7
If still intact, remove the old slide from the drum slide bearing.
8
Install the new drum slide by hooking it on the bearing tab and sliding it into place.
9
Reposition the front panel by first aligning the tabs in the base with the slots in the panel.
10
Now lift up the drum and snap the front panel into place.
11
Secure the screws.
12
Replace the main top by inserting the control panel tabs into the slots at the back of the main top.
13
Fully position then replace the screws.
14
Secure the control panel with the screws in the back.
15
You’re now ready to plug the power cord back in and confirm that the appliance is functioning properly.
Description
This video provides step-by-step repair instructions for replacing the inner drum slide, glide, or pad on a GE gas dryer. The most common reason for replacing the drum slides is when the slides are worn-out and the dryer is making noise.

All of the information for this inner drum slide replacement video is applicable to the following brands:
GE, Hotpoint, RCA, Americana
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the screws at the rear of the control panel to release it.
3
Next, open the dryer door and remove the screws inside the door frame which secure the main top.
4
Now carefully slide the main top forward, unhook it from the control panel tabs and remove.
5
Uninstall the screws securing the front panel.
6
Now, lift the front panel up to remove.
7
If still intact, remove the old slide from the drum slide bearing.
8
Install the new drum slide by hooking it on the bearing tab and sliding it into place.
9
Reposition the front panel by first aligning the tabs in the base with the slots in the panel.
10
Now lift up the drum and snap the front panel into place.
11
Secure the screws.
12
Replace the main top by inserting the control panel tabs into the slots at the back of the main top.
13
Fully position then replace the screws.
14
Secure the control panel with the screws in the back.
15
You’re now ready to plug the power cord back in and confirm that the appliance is functioning properly.

Applicable Product Model

Parts Needed
Recommended Tools and Accessories
Cleaner
Cleaner
$8.99
Cleaner
Cleaner
$20.66
Cleaner
Cleaner
$14.18
Cleaner
Cleaner
$22.37
Total$0.00

Related Articles & Videos