DescriptionThis video provides step-by-step repair instructions for replacing the push button switch (or on/off switch) on a Bosch dishwasher. The most common reason for replacing the push button switch is when the dishwasher won’t start.
All of the information for this push button switch replacement video is applicable to the following brands:
Bosch, Thermador, Gaggenau, Kenmore
Step-By-Step Instructions1
As with any repair, be sure to turn off the power to your dishwasher before beginning.
2
Your first step is to open the dishwasher door and remove the screws securing the outer door panel.
3
Close the door securely and pull the outer door panel down to remove.
4
Next, remove the screws on the inner door panel securing the control panel.
5
Pull the control panel off and support it as you disconnect the wire harness from the old switch.
6
Push the switch toward the button and pull out to remove.
7
Install the new push button switch by inserting it into the control panel and pushing the switch away from the button to lock it into place.
8
Connect the wire harness to the new switch.
9
Reposition the control panel and replace the screws in the inner door panel to secure.
10
Reinstall the outer door panel by sliding it up into position and replace the screws in the inner panel to secure.
11
You’re now ready to turn the power supply back on and confirm that the dishwasher is functioning properly.