DescriptionThis video provides step-by-step instructions for replacing the outer door panel on GE dishwashers. The most common reason for replacing the outer door panel, which is purely aesthetic, is if it becomes scratched or damaged.
All of the information in this door panel replacement video is applicable to the following brands: GE, Hotpoint, RCA, Kenmore
Step-By-Step Instructions1
As with any repair, be sure to turn off the power supply to your dishwasher before beginning.
2
To replace the outer door panel, your first step is to remove the screws to release the lower access panels and set the panels aside.
3
Next, remove the mounting screws at the bottom of the outer door panel.
4
Now pull the panel forward and down to remove.
5
Install the new outer door panel by sliding it up into position.
6
Align the holes at the bottom and replace the mounting screws.
7
Replace the lower access panels and secure them with the screws.
8
You’re now ready to turn the power supply back on and confirm that the dishwasher door opens and closes properly.