Shipping all 7 days! Hold times are long. Already ordered? Email [email protected]Learn more
Whirlpool/Kenmore Electric Dryer Dryness Control Board 8558178
Skill Level
Total Parts Cost
$312.47Estimated Savings
$112.5000:57
19k
10
- Description
This video provides step-by-step repair instructions for replacing the dryness control board on a Whirlpool/Kenmore electric dryer. The most common reasons for replacing the dryness control board are when the dryer takes too long to dry clothes or stops mid-cycle.
All of the information for this dryness control board replacement video is applicable to the following brands:
Whirlpool, Kenmore, KitchenAid, Maytag, Crosley, Amana, Roper, Inglis
Tools needed: hex socket
All of the information for this dryness control board replacement video is applicable to the following brands:
Whirlpool, Kenmore, KitchenAid, Maytag, Crosley, Amana, Roper, Inglis
Tools needed: hex socket
Step By Step Instructions
1
As with any repair, be sure you’ve unplugged the appliance before beginning.
2
Your first step is to remove the control panel’s back panel.
3
Now carefully remove the old dryness control board from the mounting base.
4
Be aware that the edges along the inside of the control panel may be sharp.
5
Install the new dryness control board by aligning the slots in the board with the mounting base and gently pushing the board into position.
6
Replace the back panel and secure the screws and plug the appliance back in to confirm the new dryness control board is functioning properly.
Description
This video provides step-by-step repair instructions for replacing the dryness control board on a Whirlpool/Kenmore electric dryer. The most common reasons for replacing the dryness control board are when the dryer takes too long to dry clothes or stops mid-cycle.
All of the information for this dryness control board replacement video is applicable to the following brands:
Whirlpool, Kenmore, KitchenAid, Maytag, Crosley, Amana, Roper, Inglis
Tools needed: hex socket
All of the information for this dryness control board replacement video is applicable to the following brands:
Whirlpool, Kenmore, KitchenAid, Maytag, Crosley, Amana, Roper, Inglis
Tools needed: hex socket
Step-By-Step Instructions
1
As with any repair, be sure you’ve unplugged the appliance before beginning.
2
Your first step is to remove the control panel’s back panel.
3
Now carefully remove the old dryness control board from the mounting base.
4
Be aware that the edges along the inside of the control panel may be sharp.
5
Install the new dryness control board by aligning the slots in the board with the mounting base and gently pushing the board into position.
6
Replace the back panel and secure the screws and plug the appliance back in to confirm the new dryness control board is functioning properly.
Applicable Product Model
Parts Needed
Dryness Control Board
$312.47
Recommended Tools and Accessories
Cleaner
$8.99
Cleaner
$20.66
Cleaner
$14.18
Cleaner
$22.37
Cooktop Cleaner
$16.06
Total$0.00
About Us
Start doing it yourself with the confidence that comes with 100+ years of experience. We've got millions of parts, hundreds of brands, and thousands of step-by-step videos— everything you need to find it, fix it and finish the job right.
© 2022 RepairClinic.com1‑800‑269‑2609
