Frigidaire Upright Freezer Light Switch Replacement #216822900

loading...

01:35
15k
18
This video provides step-by-step repair instructions for replacing the leveling leg on a Frigidaire upright freezer. The most common reason for replacing the light switch is when the light bulb isn’t burned out but the light won't turn on.

All of the information for this freezer light switch replacement video is applicable to the following brands:
Frigidaire, Kenmore, Crosley, Gibson, Universal, Kelvinator, Electrolux, Westinghouse, Tappan, Arctic Air

Step By Step Instructions

1
As with any repair, you should unplug the power cord before beginning.
2
To replace the light switch on your freezer
3
First remove the screws to release the kick plate.
4
Reach through the opening in the frame and push the left side of the old light switch out.
5
Now depress the tab on the right side to fully detach the switch from the frame.
6
Disconnect the wires to remove the old switch.
7
Install the new light switch by first connecting the wires.
8
Now align the switch with the hole in the frame and snap it into place.
9
Reposition the kick plate and replace the screws to secure.
10
You’re now ready to plug the power cord back in and confirm that the new light switch is working properly.
Description
This video provides step-by-step repair instructions for replacing the leveling leg on a Frigidaire upright freezer. The most common reason for replacing the light switch is when the light bulb isn’t burned out but the light won't turn on.

All of the information for this freezer light switch replacement video is applicable to the following brands:
Frigidaire, Kenmore, Crosley, Gibson, Universal, Kelvinator, Electrolux, Westinghouse, Tappan, Arctic Air
Step-By-Step Instructions
1
As with any repair, you should unplug the power cord before beginning.
2
To replace the light switch on your freezer
3
First remove the screws to release the kick plate.
4
Reach through the opening in the frame and push the left side of the old light switch out.
5
Now depress the tab on the right side to fully detach the switch from the frame.
6
Disconnect the wires to remove the old switch.
7
Install the new light switch by first connecting the wires.
8
Now align the switch with the hole in the frame and snap it into place.
9
Reposition the kick plate and replace the screws to secure.
10
You’re now ready to plug the power cord back in and confirm that the new light switch is working properly.

Applicable Product Model

Parts Needed
Total$0.00

Related Articles & Videos

Customer Reviews