Back

Fault Codes

KitchenAid Range/Stove/Oven

NOTE: Not valid for Y line. If there is a Y near the end of your model number, do not use this chart.

Failure Code	Condition	Check/Repair
4 Digit Failure Code
F0 - E0	Analog to Digital Failure	Disconnect for 30 seconds - if display re-appears - replace control
F1 - E1	Safety flip flop	Replace Electronic Range Control/Clock(ERC)
F2 - E0	Shorted keypad	Replace Electronic Range Control/Clock(ERC)
F3 - E0	Oven temperature sensor or oven temperature sensor fuse opened	Replace oven temperature sensor or fuse
F3 - E1	Oven temperature sensor shorted	Replace oven temperature sensor
F3 - E2	Oven too hot	Replace oven temperature sensor
F3 - E3	Clean temp too hot	Replace oven temperature sensor
F5 - E0 F5 - E1 and E2	Check door/latch switch	Replace component
2 Digit Failure Code
F0 or F1 or F5	Failed transistor	Replace Electronic Range Control/Clock(ERC)
F2 - E0	Oven temp too high	1. Test operation of door lock on self-clean models 2. Test relay contact operation 3. High resistance in oven temperature sensor
F3	Open oven temperature sensor or thermal fuse	Replace oven temperature sensor or thermal fuse
F4	Shorted oven temperature sensor	Replace oven temperature sensor
F6	Problem in time keeping circuit	1. Reset time and/or cooking operation 2. Check for proper ground
F7	Stuck function switch or button on Electronic Range Control (ERC)	Replace Electronic Range Control/Clock(ERC)
F8	Failure of Electronic Range Control (ERC)	Replace Electronic Range Control/Clock(ERC)
F9	Door lock circuit	Check wiring and test operation of door lock switch