Choose Product
Identify Problem
03
Find Solutions

Edger starts then stalls

To find just the right part, enter your model number.
We can help you find your model number right away.
Common solutions for: Edger starts then stalls
Solution 1:
Spark Arrestor
The spark arrestor is a small screen that prevents the engine from emitting sparks. Over time, the spark arrestor can become clogged with soot. If the spark arrestor is clogged, the edger may stall or... run roughly. To unclog the spark arrestor, remove it and clean it with a wire brush. You can also replace the spark arrestor.
Required Part
Edger Spark Arrestor
Enter model number to search for the required part specific to your product
Browse our parts categories to select from a variety of parts for your product
SHOP PARTS
Solution 2:
Carburetor
The carburetor might be clogged. A clogged carburetor is often caused by leaving fuel in the edger for a long period of time. Over time, some of the ingredients in the fuel will evaporate, leaving beh...ind a thicker, stickier substance. This sticky fuel can clog up the carburetor and cause the engine to stall or run roughly. If the carburetor is clogged, try cleaning it with carburetor cleaner. If cleaning the carburetor isn’t effective, rebuild or replace the entire carburetor.
Required Part
Edger Carburetor
Enter model number to search for the required part specific to your product
Browse our parts categories to select from a variety of parts for your product
SHOP PARTS
Solution 3:
Carburetor Repair Kit
The carburetor might be clogged. A clogged carburetor is often caused by leaving fuel in the edger for a long period of time. Over time, some of the ingredients in the fuel will evaporate, leaving beh...ind a thicker, stickier substance. This sticky fuel can clog up the carburetor and cause the engine to stall or run roughly. If the carburetor is clogged, try cleaning it with carburetor cleaner. If cleaning the carburetor isn’t effective, rebuild or replace the entire carburetor.
Required Part
Edger Carburetor Repair Kit
Enter model number to search for the required part specific to your product
Browse our parts categories to select from a variety of parts for your product
SHOP PARTS
Solution 4:
Fuel Filter
The fuel filter might be clogged. A clogged fuel filter is often caused by leaving fuel in the edger for a long period of time. Over time, some of the ingredients in the fuel may evaporate, leaving be...hind a thicker, stickier substance. This sticky fuel can clog up the fuel filter and cause the engine to stall. If old fuel was left in the chainsaw, drain the old fuel from the fuel tank and replace the fuel filter.
Required Part
Edger Fuel Filter
Enter model number to search for the required part specific to your product
Browse our parts categories to select from a variety of parts for your product
SHOP PARTS
Solution 5:
Air Filter
The air filter may be clogged or dirty. If the air filter is clogged, the engine will get too much fuel and not enough air. As a result, the engine may stall. Inspect the air filter to determine if it... is clogged. If the air filter is clogged, replace it.
Required Part
Edger Air Filter
Enter model number to search for the required part specific to your product
Browse our parts categories to select from a variety of parts for your product
SHOP PARTS