• 1-800-269-2609
  • En Español
  • Available 7 days a week

Frigidaire Oven Broiler Not Working

PLEB30T8CCB

The part(s) or condition(s) listed below for the symptom Oven broiler not working are ordered from most likely to least likely to occur. Check or test each item, starting with the items at the top of the page.

Most Frequent Causes for Oven broiler not working

Cause 1Broil Element

The broiler element may have burned out. When the broil element is heating properly, it glows red hot. If the element does not glow red, this indicates that the element is not heating. Often, if the element has burned out, it will be visibly damaged. Inspect the broil element for holes or blisters. To determine if the broil element has burned out, use a multimeter to test the element for continuity. If the broil element does not have continuity, replace it.

Part Testing
Parts
Broil Element for your FrigidaireRange/Stove/Oven
Broil Element - Part # 2210952 Mfg Part # 318255605
Add to Cart
Install Help
Cause 2Loose or Burnt Wire Connection

One of the wires that supply power to the broil element or broil burner igniter might be burned out. These wires commonly burn out near the heating element. To determine if a wire has burned out, inspect the wires leading to the element or igniter. If a wire is burned out, it will often be visibly burnt.

Cause 3Relay Board

Some ovens are equipped with a relay board. The relay board has several relays which control the voltage to the broiler heating circuit. If one or more of the relays on the relay board fails, the broil element won't work. However, this rarely occurs. Before replacing the relay board, first check all of the heating components in the oven. If none of the heating components are defective, the relay board might be at fault. If the relay board is defective, replace it.

Parts
Relay Board for your FrigidaireRange/Stove/Oven
Relay Board - Part # 499738 Mfg Part # 318022001
Add to Cart
Cause 4Relay Board

Some ovens are equipped with a relay board. The relay board has several relays which control the voltage to the broiler heating circuit. If one or more of the relays on the relay board fails, the broil element won't work. However, this rarely occurs. Before replacing the relay board, first check all of the heating components in the oven. If none of the heating components are defective, the relay board might be at fault. If the relay board is defective, replace it.

Parts
Relay Board for your FrigidaireRange/Stove/Oven
Relay Board - Part # 499739 Mfg Part # 318022002

Oven relay board with transformer. This relay board has several relays that control the power to the heating element. If one or more of the relays have failed, the oven will not heat. The relay board is often incorrectly diagnosed—be sure to test more commonly defective parts before replacing it.

Add to Cart
Cause 5Oven Control Board

The oven control board has relays that send voltage to the bake and broil circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the broil element. However, this is rarely the case. Before replacing the control board, first test all of the heating components. Since it’s not easy to test the oven control board, you will have to replace it if you suspect it's defective.

Parts
Oven Control Board for your FrigidaireRange/Stove/Oven
Oven Control Board - Part # 499450 Mfg Part # 318010501

Oven Control Board. NOTE: This part is often misdiagnosed due to a faulty Relay Control Board within the appliance.

Add to Cart