• 1-800-269-2609
  • En Español
  • Available 7 days a week

Frigidaire Oven Not Self-Cleaning

PLEB30T8CCB

The part(s) or condition(s) listed below for the symptom Oven not self-cleaning are ordered from most likely to least likely to occur. Check or test each item, starting with the items at the top of the page.

Most Frequent Causes for Oven not self-cleaning

Cause 1Oven Control Board

The oven control board has relays that send voltage to the bake and broil circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.

Parts
Oven Control Board for your FrigidaireRange/Stove/Oven
Oven Control Board - Part # 499450 Mfg Part # 318010501

Oven Control Board. NOTE: This part is often misdiagnosed due to a faulty Relay Control Board within the appliance.

Add to Cart
Cause 2Thermal Fuse

The thermal fuse is a safety feature that protects the oven from overheating. If the oven gets too hot, the thermal fuse trips to shut off power to the oven. The thermal fuse is not resettable—if the thermal fuse blows, you must replace it. To determine if the thermal fuse has blower, use a multimeter to test it for continuity. If the thermal fuse does not have continuity, replace it.

Part Testing
Parts
Thermal Fuse for your FrigidaireRange/Stove/Oven
Thermal Fuse - Part # 499302 Mfg Part # 318004900

High temperature cut-out fuse *Push red button to reset.

Add to Cart
Cause 3Door Switch

A defective door switch may prevent the oven door from locking. The door switch is often part of the circuit that causes the oven door to lock during the self-cleaning cycle. If the oven door is unable to lock, the self-cleaning cycle will not start. To determine whether the door switch is defective, use a multimeter to test it for continuity. If the door switch does not have continuity, replace it.

Part Testing
Parts
Door Switch for your FrigidaireRange/Stove/Oven
Door Switch - Part # 2220765 Mfg Part # 318394803
Add to Cart