• 1-800-269-2609
  • En Español
  • Available 7 days a week

GE Oven Not Self-Cleaning

JTP35SM2SS

The part(s) or condition(s) listed below for the symptom Oven not self-cleaning are ordered from most likely to least likely to occur. Check or test each item, starting with the items at the top of the page.

Most Frequent Causes for Oven not self-cleaning

Cause 1Door Lock Motor and Switch Assembly

During the oven's self-cleaning cycle, the door lock switch activates the door lock motor to prevent the oven door from being opened. If the door lock motor and switch assembly is defective, the oven door will not unlock once the self-cleaning cycle is complete. On most ovens, you can open the oven door by removing certain screws or panels. Check your owner's manual for further instructions.

Parts
Door Lock Motor and Switch Assembly for your GERange/Stove/Oven
Add to Cart
Cause 2Temperature Control Thermostat

The oven thermostat sends voltage to the heating circuit and regulates the temperature of the oven during the self-cleaning cycle. It is possible for the oven thermostat to function properly for baking and broiling but not for cleaning. Due to its complexity, the oven thermostat is difficult to test. If you suspect the oven thermostat is at fault, replace it.

Parts
Temperature Control Thermostat for your GERange/Stove/Oven
Add to Cart
Cause 3Oven Control Board

The oven control board has relays that send voltage to the bake and broil circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.

Parts
Oven Control Board for your GERange/Stove/Oven
Oven Control Board - Part # 1262890 Mfg Part # WB27T10911

Control board and housing assembly

Add to Cart
Cause 4Oven Control Board

The oven control board has relays that send voltage to the bake and broil circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.

Parts
Oven Control Board for your GERange/Stove/Oven
Add to Cart
Cause 5Thermal Fuse

The thermal fuse is a safety feature that protects the oven from overheating. If the oven gets too hot, the thermal fuse trips to shut off power to the oven. The thermal fuse is not resettable—if the thermal fuse blows, you must replace it. To determine if the thermal fuse has blower, use a multimeter to test it for continuity. If the thermal fuse does not have continuity, replace it.

Part Testing
Parts
Thermal Fuse for your GERange/Stove/Oven
Thermal Fuse - Part # 911014 Mfg Part # WB24T10060

Limit switch-upper(lock)

Add to Cart