• 1-800-269-2609
  • En Español
  • Available 7 days a week

Amana Range Surface Element Won't Turn Off

ART6600WW

The part(s) or condition(s) listed below for the symptom Range surface element won't turn off are ordered from most likely to least likely to occur. Check or test each item, starting with the items at the top of the page.

Most Frequent Causes for Range surface element won't turn off

Cause 1Surface Element Switch

The surface element switch sends voltage to the surface element coil. Sometimes, when the surface element switch fails, the electrical contacts inside the switch fuse together, causing the switch to send continuous voltage to the surface element. If the surface element switch is defective, replace it.

Parts
Surface Element Switch for your AmanaRange/Stove/Oven
Surface Element Switch - Part # 343473 Mfg Part # 0309549

Surface burner switch for dual element electric burner

Cause 2Surface Element Switch

The surface element switch sends voltage to the surface element coil. Sometimes, when the surface element switch fails, the electrical contacts inside the switch fuse together, causing the switch to send continuous voltage to the surface element. If the surface element switch is defective, replace it.

Parts
Surface Element Switch for your AmanaRange/Stove/Oven
Surface Element Switch - Part # 915643 Mfg Part # WP32064502

Surface element infinite control switch

Add to Cart
Cause 3Surface Element Switch

The surface element switch sends voltage to the surface element coil. Sometimes, when the surface element switch fails, the electrical contacts inside the switch fuse together, causing the switch to send continuous voltage to the surface element. If the surface element switch is defective, replace it.

Parts
Surface Element Switch for your AmanaRange/Stove/Oven
Surface Element Switch - Part # 1166060 Mfg Part # WP74011243

Surface burner infinite control switch

Add to Cart
Cause 4Radiant Surface Element

Sometimes, when the surface element is shorted out, it is visibly damaged. Inspect the surface element for damage. If the element is damaged, replace it. To determine if the element has shorted out, use a multimeter to test the element for continuity between the prongs and the case. If the radiant surface element shows continuity between the prongs and the case, this indicates that it is shorted out. If the radiant surface element is shorted out, replace it.

Part Testing
Parts
Radiant Surface Element for your AmanaRange/Stove/Oven
Radiant Surface Element - Part # 958563 Mfg Part # WP32082801

Small element assembly with limit switch (1200 Watt

Add to Cart
Cause 5Radiant Surface Element

Sometimes, when the surface element is shorted out, it is visibly damaged. Inspect the surface element for damage. If the element is damaged, replace it. To determine if the element has shorted out, use a multimeter to test the element for continuity between the prongs and the case. If the radiant surface element shows continuity between the prongs and the case, this indicates that it is shorted out. If the radiant surface element is shorted out, replace it.

Part Testing
Parts
Radiant Surface Element for your AmanaRange/Stove/Oven
Radiant Surface Element - Part # 1009575 Mfg Part # WP74007839

Surface element (2000w)

Add to Cart
Cause 6Radiant Surface Element

Sometimes, when the surface element is shorted out, it is visibly damaged. Inspect the surface element for damage. If the element is damaged, replace it. To determine if the element has shorted out, use a multimeter to test the element for continuity between the prongs and the case. If the radiant surface element shows continuity between the prongs and the case, this indicates that it is shorted out. If the radiant surface element is shorted out, replace it.

Part Testing
Parts
Radiant Surface Element for your AmanaRange/Stove/Oven
Radiant Surface Element - Part # 4454909 Mfg Part # W10823699

Surface Element, 1500 W

Add to Cart
Cause 7Radiant Surface Element

Sometimes, when the surface element is shorted out, it is visibly damaged. Inspect the surface element for damage. If the element is damaged, replace it. To determine if the element has shorted out, use a multimeter to test the element for continuity between the prongs and the case. If the radiant surface element shows continuity between the prongs and the case, this indicates that it is shorted out. If the radiant surface element is shorted out, replace it.

Part Testing
Parts
Radiant Surface Element for your AmanaRange/Stove/Oven
Radiant Surface Element - Part # 4458722 Mfg Part # W10823726
Add to Cart