• 1-800-269-2609
  • En Español
  • Available 7 days a week

Jenn Air Range Surface Element Won't Turn Off

JES8850AAB

The part(s) or condition(s) listed below for the symptom Range surface element won't turn off are ordered from most likely to least likely to occur. Check or test each item, starting with the items at the top of the page.

Most Frequent Causes for Range surface element won't turn off

Cause 1Surface Element Switch

The surface element switch sends voltage to the surface element coil. Sometimes, when the surface element switch fails, the electrical contacts inside the switch fuse together, causing the switch to send continuous voltage to the surface element. If the surface element switch is defective, replace it.

Parts
Surface Element Switch for your Jenn AirRange/Stove/Oven
Surface Element Switch - Part # 1014250 Mfg Part # 12002125

Surface burner control switch for dual-sized burner, series M

Add to Cart
Cause 2Surface Element Switch

The surface element switch sends voltage to the surface element coil. Sometimes, when the surface element switch fails, the electrical contacts inside the switch fuse together, causing the switch to send continuous voltage to the surface element. If the surface element switch is defective, replace it.

Parts
Surface Element Switch for your Jenn AirRange/Stove/Oven
Surface Element Switch - Part # 1939345 Mfg Part # WP7403P402-60

Surface element control switch

Add to Cart
Cause 3Radiant Surface Element

Sometimes, when the surface element is shorted out, it is visibly damaged. Inspect the surface element for damage. If the element is damaged, replace it. To determine if the element has shorted out, use a multimeter to test the element for continuity between the prongs and the case. If the radiant surface element shows continuity between the prongs and the case, this indicates that it is shorted out. If the radiant surface element is shorted out, replace it.

Part Testing
Parts
Radiant Surface Element for your Jenn AirRange/Stove/Oven
Radiant Surface Element - Part # 922708 Mfg Part # WP8523694

Element, surface (2200W)

Add to Cart
Cause 4Radiant Surface Element

Sometimes, when the surface element is shorted out, it is visibly damaged. Inspect the surface element for damage. If the element is damaged, replace it. To determine if the element has shorted out, use a multimeter to test the element for continuity between the prongs and the case. If the radiant surface element shows continuity between the prongs and the case, this indicates that it is shorted out. If the radiant surface element is shorted out, replace it.

Part Testing
Parts
Radiant Surface Element for your Jenn AirRange/Stove/Oven
Add to Cart
Cause 5Radiant Surface Element

Sometimes, when the surface element is shorted out, it is visibly damaged. Inspect the surface element for damage. If the element is damaged, replace it. To determine if the element has shorted out, use a multimeter to test the element for continuity between the prongs and the case. If the radiant surface element shows continuity between the prongs and the case, this indicates that it is shorted out. If the radiant surface element is shorted out, replace it.

Part Testing
Parts
Radiant Surface Element for your Jenn AirRange/Stove/Oven
Radiant Surface Element - Part # 1032748 Mfg Part # 12002146

Radiant surface element, 1200 Watts

Add to Cart
Cause 6Radiant Surface Element

Sometimes, when the surface element is shorted out, it is visibly damaged. Inspect the surface element for damage. If the element is damaged, replace it. To determine if the element has shorted out, use a multimeter to test the element for continuity between the prongs and the case. If the radiant surface element shows continuity between the prongs and the case, this indicates that it is shorted out. If the radiant surface element is shorted out, replace it.

Part Testing
Parts
Radiant Surface Element for your Jenn AirRange/Stove/Oven
Radiant Surface Element - Part # 1032749 Mfg Part # 12002147

Radiant surface element, 1200 watts

Add to Cart
Cause 7Radiant Surface Element

Sometimes, when the surface element is shorted out, it is visibly damaged. Inspect the surface element for damage. If the element is damaged, replace it. To determine if the element has shorted out, use a multimeter to test the element for continuity between the prongs and the case. If the radiant surface element shows continuity between the prongs and the case, this indicates that it is shorted out. If the radiant surface element is shorted out, replace it.

Part Testing
Parts
Radiant Surface Element for your Jenn AirRange/Stove/Oven
Add to Cart
Cause 8Radiant Surface Element

Sometimes, when the surface element is shorted out, it is visibly damaged. Inspect the surface element for damage. If the element is damaged, replace it. To determine if the element has shorted out, use a multimeter to test the element for continuity between the prongs and the case. If the radiant surface element shows continuity between the prongs and the case, this indicates that it is shorted out. If the radiant surface element is shorted out, replace it.

Part Testing
Parts
Radiant Surface Element for your Jenn AirRange/Stove/Oven
Radiant Surface Element - Part # 4454451 Mfg Part # W10823711

Surface element with limiter, 6 inch, 1200 watts

Add to Cart