• 1-800-269-2609
  • En Español
  • Available 7 days a week

Hotpoint Refrigerator Leaking Water

CSX22DLK

The part(s) or condition(s) listed below for the symptom Refrigerator leaking water are ordered from most likely to least likely to occur. Check or test each item, starting with the items at the top of the page.

Most Frequent Causes for Refrigerator leaking water

Cause 1Clogged or Freezing Defrost Drain

If the defrost drain is frozen, the water will overflow the drain trough and drip down to the bottom of the compartment. This water can eventually leak onto the floor. Check the defrost drain to determine if it is clogged or frozen. If the defrost drain is frozen, thaw the ice. In addition, flush the drain with hot water to ensure that it is clear of debris.

Cause 2Water Tank Assembly

Inspect the water tank assembly for any leaks. Be aware that the leak may be very small and hard to find. If you discover a leak, replace the water tank. Do not attempt to repair the water tank—glue will not stick properly to the plastic of the tank.

Parts
Water Tank Assembly for your HotpointRefrigerator
Water Tank Assembly - Part # 1217 Mfg Part # WR17X2132

In-refrigerator water supply reservoir with tubes and connection fittings

Cause 3Water Inlet Valve

The water inlet valve opens to supply water to the dispenser and icemaker. If the water inlet valve is cracked or has a loose fitting, water will leak from the valve. Inspect the water inlet valve for cracks, and make sure that it is tightly secured to the water supply line.

Parts
Water Inlet Valve for your HotpointRefrigerator
Cause 4Water Inlet Valve

The water inlet valve opens to supply water to the dispenser and icemaker. If the water inlet valve is cracked or has a loose fitting, water will leak from the valve. Inspect the water inlet valve for cracks, and make sure that it is tightly secured to the water supply line.

Part Testing
Parts
Water Inlet Valve for your HotpointRefrigerator
Water Inlet Valve - Part # 1032629 Mfg Part # WR57X10051

Dual water inlet valve kit. New, quick connections. Cut retaining nuts off of existing plastic water lines and gently push them into new valve. To remove, depress ring that the tube slides into.

Add to Cart