• 1-800-269-2609
  • En Español
  • Available 7 days a week

Amana Refrigerator Ice Maker Overflowing

BBI20TE

The part(s) or condition(s) listed below for the symptom Refrigerator ice maker overflowing are ordered from most likely to least likely to occur. Check or test each item, starting with the items at the top of the page.

Most Frequent Causes for Refrigerator ice maker overflowing

Cause 1Water Inlet Valve

The water inlet valve requires a minimum of 20 psi to shut off properly. If the water pressure is too low, the valve may not close fully once the power is shut off. As a result, the valve will leak water into the ice maker and cause the ice maker to overflow. Check the water pressure to determine if it is at least 20 psi. If the water pressure is sufficient, the water inlet valve is likely defective. The valve may not shut off all the way or may be stuck open, causing water to leak through the valve. If the water pressure is sufficient, but the ice maker is still overflowing, replace the water inlet valve.

Part Testing
Parts
Water Inlet Valve for your AmanaRefrigerator
Water Inlet Valve - Part # 4338035 Mfg Part # W10833899
Add to Cart
Cause 2Low Water Pressure from House Supply

The water inlet valve supplies water to the refrigerator ice and water dispenser. The valve requires a minimum of 20psi to work properly. If the water pressure is too low, the valve may not close fully when the power is shut off. As a result, the valve leaks water into the ice maker, causing it to overflow. Check the water flow and test the pressure to determine if it is at least 20 psi.

Cause 3Ice Maker Assembly

One component of the ice maker assembly might be defective. Since many of the ice maker components are not sold separately, you may need to purchase and replace the entire ice maker assembly.

Parts
Ice Maker Assembly for your AmanaRefrigerator
Ice Maker Assembly - Part # 915772 Mfg Part # D7824706Q

Refrigerator icemaker assembly, modular style. The new icemaker does not include a new cover, ice level arm, or wire harness, these components will need to be reused from original icemaker.

Add to Cart