• 1-800-269-2609
  • En Español
  • Available 7 days a week

Troy-Bilt Snowblower Auger Not Turning

10530

The part(s) or condition(s) listed below for the symptom Snowblower auger not turning are ordered from most likely to least likely to occur. Check or test each item, starting with the items at the top of the page.

Most Frequent Causes for Snowblower auger not turning

Cause 1V-Belt

The V-belt makes the connection between the engine and the gearbox. If the V-belt is worn out, misadjusted, or broken, the auger won’t turn. Inspect the V-belt to determine if it is broken or worn out. If the belt is broken or worn out, replace it. If the belt is not broken or worn out, ensure that the belt is properly adjusted, and adjust the belt if necessary.

Parts
V-Belt for your Troy-BiltSnowblower
Add to Cart
Cause 2Shear Pin

The shear pin is a metal pin that slides through the auger axle sleeve, locking the sleeve in place with the auger drive axle. Shear pins are designed to break in half if the auger hits a rock or chunk of ice to prevent damage to the engine. If the shear pin breaks, the auger won’t be able to turn. Inspect the shear pin to determine if it is broken. If the shear pin is broken, replace it.

Parts
Shear Pin for your Troy-BiltSnowblower
Shear Pin - Part # 1726965 Mfg Part # 710-0891

Shear pin. Replace the locking nut when replacing the shear pin. See related item for the correct locking nut.

Add to Cart
Cause 3Auger Assembly

First, check the shear pins for damage. If the shear pins are broken or worn out, replace them. Next, check the auger blades. If the auger blades are bent or damaged, replace them. If the entire auger assembly is worn out, replace the auger assembly.

Parts
Auger Assembly for your Troy-BiltSnowblower
Add to Cart
Cause 4Auger Assembly

First, check the shear pins for damage. If the shear pins are broken or worn out, replace them. Next, check the auger blades. If the auger blades are bent or damaged, replace them. If the entire auger assembly is worn out, replace the auger assembly.

Parts
Auger Assembly for your Troy-BiltSnowblower
Add to Cart
Cause 5Auger Assembly

First, check the shear pins for damage. If the shear pins are broken or worn out, replace them. Next, check the auger blades. If the auger blades are bent or damaged, replace them. If the entire auger assembly is worn out, replace the auger assembly.

Parts
Auger Assembly for your Troy-BiltSnowblower
Add to Cart
Cause 6Bearing

One or more of the bearings might have seized. If a bearing has seized, replace the bearing.

Parts
Bearing for your Troy-BiltSnowblower
Bearing - Part # 1842940 Mfg Part # 941-04024

Bearing-self-align

Add to Cart
Cause 7Auger Cable

When the auger cable is engaged, the auger rotates. If the auger cable broken or not adjusted properly, the auger will not turn. Inspect the auger cable to determine if it is broken. If the auger cable is broken, replace it. Make sure that the cable has the proper amount of tension. If the cable can be adjusted, adjust the cable if necessary. If the cable tension is not set properly, and it is not possible to adjust the cable, replace it.

Parts
Auger Cable for your Troy-BiltSnowblower
Add to Cart