Choose Product
Identify Problem
03
Find Solutions

Gibson Washer overflowing

To find just the right part, enter your model number.
We can help you find your model number right away.
Common solutions for: Gibson Washer overflowing
Solution 1:
Water Inlet Valve
Try shutting off power to the washer while the machine is filling with water. If the washer continues to fill with water even when it is not getting power, this indicates that the water inlet valve...
Required Part
Washer/Dryer Combo Water Inlet Valve
Enter model number to search for the required part specific to your product
Browse our parts categories to select from a variety of parts for your product
Solution 2:
Pressure Switch
The pressure switch shuts off power to the water inlet valve when the proper water level is reached. If the pressure switch fails, the water inlet valve will continue to fill the washer tub with...
Required Part
Washer/Dryer Combo Pressure Switch
Enter model number to search for the required part specific to your product
Browse our parts categories to select from a variety of parts for your product
Solution 3:
Low Water Pressure from House Supply
The water pressure to the water inlet valve might be too low. The water inlet valve requires a minimum of 20 psi to shut off properly. If the water inlet valve does not get enough pressure, the valve may not close fully after the power is shut off. As a result, water can leak into the washer and cause it to overflow. Check the water pressure to determine if it is sufficient.