• 1-800-269-2609
  • En Español
  • Available 7 days a week

Amana Washer Won't Spin

NAV5805AWW

The part(s) or condition(s) listed below for the symptom Washer won't spin are ordered from most likely to least likely to occur. Check or test each item, starting with the items at the top of the page.

Most Frequent Causes for Washer won't spin

Cause 1Drive Pulley

The drive pulley connects to the washer drum and works with the drive belt and motor to rotate the drum. If the drive pulley is worn out, the drive belt might slip off, preventing the washer from spinning. Remove the drive pulley and inspect it. If the drive pulley is defective, replace it.

Parts
Drive Pulley for your AmanaWashing Machine
Drive Pulley - Part # 1042142 Mfg Part # 12002213

Washing machine transmission pulley (or drive pulley). Includes pulley. thrust washer, and bearing kit. If the washer's bearing is worn out, the washer may spin slowly or may not spin at all.

Add to Cart
Cause 2Drive Motor

The drive motor might be defective. However, the drive motor is rarely at fault for this symptom. Before replacing the drive motor, first check all of the more commonly defective washer components. If none of those components are defective, consider replacing the drive motor. To determine if the drive motor is defective, first ensure that the motor is getting power. If the drive motor hums but doesn’t run, is noisy, or does not turn freely, replace it.

Parts
Drive Motor for your AmanaWashing Machine
Drive Motor - Part # 1023733 Mfg Part # WP21001950

Washing machine drive motor with 2 speeds and 1/2 horsepower. The motor drives the main transmission pulley and drain pump.

Add to Cart