• 1-800-269-2609
  • En Español
  • Available 7 days a week

LG Washer Won't Spin

WM2277HB

The part(s) or condition(s) listed below for the symptom Washer won't spin are ordered from most likely to least likely to occur. Check or test each item, starting with the items at the top of the page.

Most Frequent Causes for Washer won't spin

Cause 1Stator Assembly

The stator interacts with the rotor to create a strong electromagnetic field which rotates the tub in either direction. If the windings on the stator are damaged, the washer will not spin or agitate. Check the stator for damaged windings or other defects.

Parts
Stator Assembly for your LGWashing Machine
Stator Assembly - Part # 2649230 Mfg Part # 4417EA1002Y

Washing machine stator assembly with sensor.

Add to Cart
Cause 2Rotor Assembly

The rotor interacts with the stator to create a strong electromagnetic field, which rotates the tub in either direction. If the magnets on the rotor are damaged, or any part of the rotor is defective, the washer may not spin or agitate. To determine if the rotor is defective, inspect the rotor for damage. If the rotor is damaged, replace it.

Parts
Rotor Assembly for your LGWashing Machine
Rotor Assembly - Part # 2003265 Mfg Part # AHL72914402

Washing machine rotor assembly. The rotor interacts with the stator to create a strong electromagnetic field which rotates the tub in either direction. If the magnets on the rotor are damaged, or if any part of the rotor is defective, the washer may not spin or agitate.

Add to Cart
Install Help
Cause 3Tub Bearing

The tub bearing is mounted in the middle of the outer tub of the washing machine. The tub bearing helps to keep the inner tub spinning smoothly. If the tub bearing is defective, it can lock up and prevent the washer from spinning. The washer may also make a loud rumbling noise. Replacing the tub bearing is a very involved repair and will require disassembling most of the washer. If the tub bearing is defective, we recommend replacing both the outer tub and bearing as an assembly.

Parts
Tub Bearing for your LGWashing Machine
Tub Bearing - Part # 1267498 Mfg Part # 4280FR4048E

Washer tub bearing, rear. This part is very difficult to install. The manufacturer recommends replacing the complete rear tub and bearing assembly.

Add to Cart
Cause 4Tub Bearing

The tub bearing is mounted in the middle of the outer tub of the washing machine. The tub bearing helps to keep the inner tub spinning smoothly. If the tub bearing is defective, it can lock up and prevent the washer from spinning. The washer may also make a loud rumbling noise. Replacing the tub bearing is a very involved repair and will require disassembling most of the washer. If the tub bearing is defective, we recommend replacing both the outer tub and bearing as an assembly.

Parts
Tub Bearing for your LGWashing Machine
Tub Bearing - Part # 1267500 Mfg Part # 4280FR4048L

Tub bearing. This parts is very difficult to install. The manufacturer recommends replacing the complete rear tub and bearing assembly.

Add to Cart
Cause 5Rear Drum with Bearing

The rear drum has a bearing or bearings in it to keep the inner tub spinning smoothly. If the tub bearing system is defective the washer can become very noisy and the tub can stop spinning. On some machines bearings are sold separately from the rear drum, however we recommend replacing both the outer drum and bearing as an assembly if the manufacturer offers the components together because removing and pressing in the new bearing can be exceptionally difficult. Be aware that replacing the outer tub and bearing is also not easy and can be very costly.

Parts
Rear Drum with Bearing for your LGWashing Machine
Rear Drum with Bearing - Part # 1396655 Mfg Part # AJQ35154201

Replacement rear outer tub assembly. The stator now mounts directly to the plastic tub without the metal mounting plate. Due to this change the stator and rotor will also need to be replaced. *Heat shield is no longer needed or manufactured.

Add to Cart