• 1-800-269-2609
  • En Español
  • Available 7 days a week

Crosley Washer Won't Agitate

CW22B5V

The part(s) or condition(s) listed below for the symptom Washer won't agitate are ordered from most likely to least likely to occur. Check or test each item, starting with the items at the top of the page.

Most Frequent Causes for Washer won't agitate

Cause 1Drive Belt

Inspect the drive belt to determine if it is broken or if it is loose on the pulleys. If the drive belt is broken or loose, replace it.

Parts
Drive Belt for your CrosleyWashing Machine
Drive Belt - Part # 1318 Mfg Part # WP21352320

Washing machine drive belt. 51 1/8" long and 3/8" wide. Medium v- shaped. If the motor runs, but the washer won't agitate, spin, or drain, the drive belt is likely broken or worn out.

Add to Cart
Cause 2Drive Motor

The drive motor might be defective. However, the drive motor is rarely at fault for this symptom. Before replacing the drive motor, first check all of the more commonly defective washer components. If none of those components are defective, consider replacing the drive motor. To determine if the drive motor is defective, first ensure that the motor is getting power. If the drive motor hums but doesn’t run, is noisy, or does not turn freely, replace it.

Parts
Drive Motor for your CrosleyWashing Machine
Drive Motor - Part # 436545 Mfg Part # 21001170

Washer motor, pulley & plate assembly

Add to Cart
Cause 3Drive Motor

The drive motor might be defective. However, the drive motor is rarely at fault for this symptom. Before replacing the drive motor, first check all of the more commonly defective washer components. If none of those components are defective, consider replacing the drive motor. To determine if the drive motor is defective, first ensure that the motor is getting power. If the drive motor hums but doesn’t run, is noisy, or does not turn freely, replace it.

Parts
Drive Motor for your CrosleyWashing Machine
Drive Motor - Part # 436737 Mfg Part # 21001400

2 Speed Drive Motor And Plate Assembly With Pulley And Tension Spring

Add to Cart
Cause 4Agitator Assembly

The agitator might be damaged or stripped away where it connects to the drive system inside. To determine if the agitator is stripped inside remove it from the washer and inspect for damage or wear.

Parts
Agitator Assembly for your CrosleyWashing Machine