• 1-800-269-2609
  • En Español
  • Available 7 days a week

Whirlpool Washer Won't Agitate

LSQ9200LQ2

The part(s) or condition(s) listed below for the symptom Washer won't agitate are ordered from most likely to least likely to occur. Check or test each item, starting with the items at the top of the page.

Most Frequent Causes for Washer won't agitate

Cause 1Agitator Repair Kit

If the washer won't agitate, replacing the agitator repair kit may solve the problem. The kit contains the agitator components that are most likely to wear out and/or fail. If any of the parts are worn out, stripped, or damaged, replace the kit.

Parts
Agitator Repair Kit for your WhirlpoolWashing Machine
Agitator Repair Kit - Part # 2744 Mfg Part # 285811

Washing machine agitator repair kit with a medium length cam (there are other kits available for different models). This kit should be used when the top part of the agitator is not moving properly but the bottom part is.

Add to Cart
Cause 2Agitator Repair Kit

If the washer won't agitate, replacing the agitator repair kit may solve the problem. The kit contains the agitator components that are most likely to wear out and/or fail. If any of the parts are worn out, stripped, or damaged, replace the kit.

Parts
Agitator Repair Kit for your WhirlpoolWashing Machine
Agitator Repair Kit - Part # 2837 Mfg Part # 285751

Washing machine agitator repair kit. Includes agitator cam and 4 directional cogs (also called dog ears). If the upper section of the agitator isn't turning properly, then the agitator cam and dog ears are likely worn-out and require replacement.

Add to Cart
Cause 3Drive Block or Bell

The drive block connects the washer transmission to the agitator. If the drive block is worn out, the transmission shaft will still move back and forth, but the agitator will only move slightly or will not move at all. Inspect the drive block for damage. If the drive block is worn out, stripped, or damaged, replace it.

Parts
Drive Block or Bell for your WhirlpoolWashing Machine
Drive Block or Bell - Part # 2858 Mfg Part # WP389140

Washer drive block for inner tub. A worn drive block may cause the washer to spin slowly, causing the clothes to be soaked at the end of the cycle. The washer may also make a loud knocking noise at the beginning of the spin cycle.

Add to Cart
Install Help
Cause 4Motor Coupling

The motor coupling connects the motor to the washer transmission. If the washer is overloaded, the motor coupling will fail in order to protect both the motor and transmission. The motor coupling can also fail due to normal wear. Inspect the motor coupling to determine if it is broken. If the motor coupling is broken, replace it.

Parts
Motor Coupling for your WhirlpoolWashing Machine
Motor Coupling - Part # 1195967 Mfg Part # 285753A

Washer drive motor coupler. New style with metal sleeves for added strength. This version replaces all previous motor coupler styles and versions. For direct drive washing machines. Common symptom of failed coupler is washer will fill, not agitate or spin but will drain the water from the tub.

Add to Cart
Cause 5Drive Motor

The drive motor might be defective. However, the drive motor is rarely at fault for this symptom. Before replacing the drive motor, first check all of the more commonly defective washer components. If none of those components are defective, consider replacing the drive motor. To determine if the drive motor is defective, first ensure that the motor is getting power. If the drive motor hums but doesn’t run, is noisy, or does not turn freely, replace it.

Parts
Drive Motor for your WhirlpoolWashing Machine
Drive Motor - Part # 675936 Mfg Part # WP661600

Washing machine drive motor, 2 speed. If your drive motor is defective, the washer won't spin, agitate, or drain.

Add to Cart
Install Help
Cause 6Lower Agitator

The lower agitator might be damaged or stripped away where it connects to the drive system inside. To determine if the lower agitator is stripped inside remove it from the washer and inspect for damage or wear.

Parts
Lower Agitator for your WhirlpoolWashing Machine
Lower Agitator - Part # 519233 Mfg Part # WP3347288
Add to Cart
Cause 7Upper Agitator

The upper agitator might be damaged or stripped out at the lower agitator connection point. Inspect the agitator for damage or wear around the connection point.

Parts
Upper Agitator for your WhirlpoolWashing Machine
Upper Agitator - Part # 2652 Mfg Part # WP3348752

Upper agitator assembly

Add to Cart
Cause 8Agitator Assembly

The agitator might be damaged or stripped away where it connects to the drive system inside. To determine if the agitator is stripped inside remove it from the washer and inspect for damage or wear.

Parts
Agitator Assembly for your WhirlpoolWashing Machine
Agitator Assembly - Part # 470786 Mfg Part # 285565

Agitator assembly

Add to Cart