• 1-800-269-2609
  • En Español
  • Available 7 days a week

Inglis Washer Won't Drain

IP44000

The part(s) or condition(s) listed below for the symptom Washer won't drain are ordered from most likely to least likely to occur. Check or test each item, starting with the items at the top of the page.

Most Frequent Causes for Washer won't drain

Cause 1Drain Pump

Sometimes, small objects or articles of clothing can get caught in the drain pump. To determine if anything is blocking the drain pump, remove the drain pump and check the pump for obstructions. If the drain pump is clear of obstructions, but is still noisy during the drain cycle, replace the drain pump.

Parts
Drain Pump for your InglisWashing Machine
Drain Pump - Part # 3296 Mfg Part # WP3363394

Washing machine drain pump. The pump mounts directly to the motor with two clips. If the washer does not drain then the pump could be locked up or a small object may be clogging it. A small leak in front of the washer could be caused by a defective pump.

Add to Cart
Cause 2Clogged Pump or Hose

Sometimes, socks and other small articles of clothing can get into the drain system and clog the pump hose or the pump itself. Remove the hoses from the pump and check for any obstructions.

Cause 3Lid Switch Assembly

The lid switch assembly prevents the washer from spinning when the lid is open. If the lid switch assembly fails, the washer will not drain. To determine if the lid switch assembly is defective, use a multimeter to test each of the lid switches for continuity. If a lid switch does not have continuity, replace it.

Part Testing
Parts
Lid Switch Assembly for your InglisWashing Machine
Lid Switch Assembly - Part # 722578 Mfg Part # WP8054980

Lid switch assembly

Add to Cart
Install Help
Cause 4Drain Hose

First, check the drain hose to determine if it is kinked, twisted, or bent. If the drain hose is bent, straighten it out. In addition, remove the drain hose and check it for obstructions. If the drain hose has any obstructions, try to remove them. If necessary, replace the drain hose.

Parts
Drain Hose for your InglisWashing Machine
Drain Hose - Part # 2732 Mfg Part # 285664

Washing machine drain hose (48") with clamp

Add to Cart
Install Help
Cause 5Drain Hose

First, check the drain hose to determine if it is kinked, twisted, or bent. If the drain hose is bent, straighten it out. In addition, remove the drain hose and check it for obstructions. If the drain hose has any obstructions, try to remove them. If necessary, replace the drain hose.

Parts
Drain Hose for your InglisWashing Machine
Drain Hose - Part # 2024991 Mfg Part # WPW10358149

Drain hose, pump to back panel

Add to Cart
Install Help
Cause 6Drain Hose

First, check the drain hose to determine if it is kinked, twisted, or bent. If the drain hose is bent, straighten it out. In addition, remove the drain hose and check it for obstructions. If the drain hose has any obstructions, try to remove them. If necessary, replace the drain hose.

Parts
Drain Hose for your InglisWashing Machine
Drain Hose - Part # 4433226 Mfg Part # WP3357027

Gooseneck for end of drain hose

Add to Cart