• 1-800-269-2609
  • En Español
  • Available 7 days a week

Whirlpool Washer Won't Drain

LHW0050PQ4

The part(s) or condition(s) listed below for the symptom Washer won't drain are ordered from most likely to least likely to occur. Check or test each item, starting with the items at the top of the page.

Most Frequent Causes for Washer won't drain

Cause 1Drain Pump

Sometimes, small objects or articles of clothing can get caught in the drain pump. To determine if anything is blocking the drain pump, remove the drain pump and check the pump for obstructions. If the drain pump is clear of obstructions, but is still noisy during the drain cycle, replace the drain pump.

Parts
Drain Pump for your WhirlpoolWashing Machine
Drain Pump - Part # 1065543 Mfg Part # WP8182415
Add to Cart
Cause 2Clogged Pump or Hose

Sometimes, socks and other small articles of clothing can get into the drain system and clog the pump hose or the pump itself. Remove the hoses from the pump and check for any obstructions.

Cause 3Drain Hose

First, check the drain hose to determine if it is kinked, twisted, or bent. If the drain hose is bent, straighten it out. In addition, remove the drain hose and check it for obstructions. If the drain hose has any obstructions, try to remove them. If necessary, replace the drain hose.

Parts
Drain Hose for your WhirlpoolWashing Machine
Drain Hose - Part # 1065281 Mfg Part # 285989

Drain manafold and pressure tube

Add to Cart
Cause 4Drain Hose

First, check the drain hose to determine if it is kinked, twisted, or bent. If the drain hose is bent, straighten it out. In addition, remove the drain hose and check it for obstructions. If the drain hose has any obstructions, try to remove them. If necessary, replace the drain hose.

Parts
Drain Hose for your WhirlpoolWashing Machine
Add to Cart
Cause 5Coin Trap

Some washers are equipped with a coin trap to trap any foreign objects that enter the drain. The coin trap should be checked and cleaned periodically. If debris continues to accumulate in the coin trap, the coin trap will become clogged, and the washer will not drain properly. If the washer won’t drain or is not draining properly, and the washer has a coin trap, remove the coin trap and clean it thoroughly.

Parts
Coin Trap for your WhirlpoolWashing Machine
Add to Cart
Cause 6Door Lock

Inspect the door strike assembly for damage. If the door strike is broken, replace it. The door strike is not repairable—if it is broken, you must replace it.

Parts
Door Lock for your WhirlpoolWashing Machine
Door Lock - Part # 1394133 Mfg Part # WPW10189551

Door Lock Latch Assembly

Add to Cart