• 1-800-269-2609
  • En Español
  • Available 7 days a week

LG Washer Fills Slowly

WM2301HR

The part(s) or condition(s) listed below for the symptom Washer fills slowly are ordered from most likely to least likely to occur. Check or test each item, starting with the items at the top of the page.

Most Frequent Causes for Washer fills slowly

Cause 1Water Inlet Valve

The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all. The water inlet valve requires sufficient water pressure to function properly. First, check the water pressure to determine that it is adequate. If the water pressure is adequate, try cleaning the screens inside the water inlet valve hose connection ports. If the washer still fills slowly, replace the water inlet valve.

Part Testing
Parts
Water Inlet Valve for your LGWashing Machine
Water Inlet Valve - Part # 1268123 Mfg Part # 5220FR2006H

Washer hot water inlet valve. Standard hose fitting inlet, 1 water outlet. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all.

Add to Cart
Install Help
Cause 2Water Inlet Valve

The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all. The water inlet valve requires sufficient water pressure to function properly. First, check the water pressure to determine that it is adequate. If the water pressure is adequate, try cleaning the screens inside the water inlet valve hose connection ports. If the washer still fills slowly, replace the water inlet valve.

Part Testing
Parts
Water Inlet Valve for your LGWashing Machine
Water Inlet Valve - Part # 4322702 Mfg Part # 5220FR2075L

Washer cold water inlet valve assembly. Three solenoids

Add to Cart
Install Help
Cause 3Low Water Pressure from House Supply

The home water pressure might be too low. The water inlet valve requires at least 20 psi to function properly. Check the water pressure to the valve to determine if it is sufficient.