• 1-800-269-2609
  • En Español
  • Available 7 days a week

Kenmore Washer Leaking Water

110.92587210

The part(s) or condition(s) listed below for the symptom Washer leaking water are ordered from most likely to least likely to occur. Check or test each item, starting with the items at the top of the page.

Most Frequent Causes for Washer leaking water

Cause 1Drain Pump

The drain pump pumps water out the drain hose. If the drain pump is cracked or damaged, or if the bearings are worn out, the drain pump may leak water. The drain pump is not repairable—if the pump is leaking water, replace it.

Parts
Drain Pump for your KenmoreWashing Machine
Drain Pump - Part # 3296 Mfg Part # WP3363394

Washing machine drain pump. The pump mounts directly to the motor with two clips. If the washer does not drain then the pump could be locked up or a small object may be clogging it. A small leak in front of the washer could be caused by a defective pump.

Add to Cart
Cause 2Tub Seal

The tub seal might be torn, causing water to leak from the seal. If the tub seal is leaking water, water may leak through the tub seal and into the tub bearings. This can cause the bearings to fail. For this reason, if the tub seal is leaking water, replace both the tub seal and the tub bearings. Be aware that this is a complicated repair and will require disassembling most of the washer.

Parts
Tub Seal for your KenmoreWashing Machine
Tub Seal - Part # 548334 Mfg Part # WP3976308

Gasket for upper outer tub ring assembly

Add to Cart
Cause 3Tub Seal

The tub seal might be torn, causing water to leak from the seal. If the tub seal is leaking water, water may leak through the tub seal and into the tub bearings. This can cause the bearings to fail. For this reason, if the tub seal is leaking water, replace both the tub seal and the tub bearings. Be aware that this is a complicated repair and will require disassembling most of the washer.

Parts
Tub Seal for your KenmoreWashing Machine
Tub Seal - Part # 4248250 Mfg Part # W10814296

Washing machine main tub seal

Add to Cart
Install Help
Cause 4Tub-to-Pump Hose

The tub-to-pump-hose might be split or torn. If the tub-to-pump-hose is damaged, replace it. Do not attempt to cut off the damaged piece of hose and stretch the hose to fit the pump. Stretching the hose will put strain on the remainder of the hose and may cause the hose to suddenly rupture.

Parts
Tub-to-Pump Hose for your KenmoreWashing Machine
Tub-to-Pump Hose - Part # 907866 Mfg Part # 285871

Hose from tub to pump, with clamps

Add to Cart
Install Help
Cause 5Drain Hose

The drain hose may be leaking. The drain hose most commonly leaks from the connection between the pump and the back of the washer. If the washer is pushed too far against the wall, the hose can rub against the wall and form a leak. Inspect the drain hose for leaks. If the drain hose is leaking, replace it.

Parts
Drain Hose for your KenmoreWashing Machine
Drain Hose - Part # 225 Mfg Part # 285702

Drain hose extension

Add to Cart
Cause 6Drain Hose

The drain hose may be leaking. The drain hose most commonly leaks from the connection between the pump and the back of the washer. If the washer is pushed too far against the wall, the hose can rub against the wall and form a leak. Inspect the drain hose for leaks. If the drain hose is leaking, replace it.

Parts
Drain Hose for your KenmoreWashing Machine
Drain Hose - Part # 2448 Mfg Part # 285666

Drain hose kit (10 foot)

Add to Cart
Cause 7Drain Hose

The drain hose may be leaking. The drain hose most commonly leaks from the connection between the pump and the back of the washer. If the washer is pushed too far against the wall, the hose can rub against the wall and form a leak. Inspect the drain hose for leaks. If the drain hose is leaking, replace it.

Parts
Drain Hose for your KenmoreWashing Machine
Drain Hose - Part # 2732 Mfg Part # 285664

Washing machine drain hose (48") with clamp

Add to Cart
Install Help
Cause 8Drain Hose

The drain hose may be leaking. The drain hose most commonly leaks from the connection between the pump and the back of the washer. If the washer is pushed too far against the wall, the hose can rub against the wall and form a leak. Inspect the drain hose for leaks. If the drain hose is leaking, replace it.

Parts
Drain Hose for your KenmoreWashing Machine
Drain Hose - Part # 2024991 Mfg Part # WPW10358149

Drain hose, pump to back panel

Add to Cart
Install Help
Cause 9Drain Hose

The drain hose may be leaking. The drain hose most commonly leaks from the connection between the pump and the back of the washer. If the washer is pushed too far against the wall, the hose can rub against the wall and form a leak. Inspect the drain hose for leaks. If the drain hose is leaking, replace it.

Parts
Drain Hose for your KenmoreWashing Machine
Drain Hose - Part # 4433226 Mfg Part # WP3357027

Gooseneck for end of drain hose

Add to Cart