• 1-800-269-2609
  • En Español
  • Available 7 days a week

Frigidaire Washer Won't Start

ATF6700FS1

The part(s) or condition(s) listed below for the symptom Washer won't start are ordered from most likely to least likely to occur. Check or test each item, starting with the items at the top of the page.

Most Frequent Causes for Washer won't start

Cause 1User Control and Display Board

To determine if the user control and display board is defective, try pressing the buttons on the control panel. If some of the buttons work, but others do not work, the control and display board might need to be replaced. Additionally, if the display is not working, check the power to the user control and display board. If the user control and display board has power, but it isn’t working, replace it.

Parts
User Control and Display Board for your FrigidaireWashing Machine
User Control and Display Board - Part # 1170673 Mfg Part # 134556500

Use interface board. NOTE: This part is often misdiagnosed and requires electrical testing with a volt/ohm meter to determine if it is defective.

Add to Cart
Cause 2User Control and Display Board

To determine if the user control and display board is defective, try pressing the buttons on the control panel. If some of the buttons work, but others do not work, the control and display board might need to be replaced. Additionally, if the display is not working, check the power to the user control and display board. If the user control and display board has power, but it isn’t working, replace it.

Parts
User Control and Display Board for your FrigidaireWashing Machine
User Control and Display Board - Part # 1464808 Mfg Part # 137006030

Washing machine user control board, NOTE: Please use your appliance model number to ensure you are ordering the correct part.

Add to Cart
Cause 3Incoming Power Problem

The electrical outlet may not be getting power. To determine if the outlet is getting power, try plugging something else into the outlet. If the outlet is not getting power, check the home circuit breakers or fuses.

Cause 4Power Cord

First ensure that power is getting to the electrical outlet. If the electrical outlet is receiving power, but the washer won’t start, the power cord might be defective. However, this is very rare. To determine if the power cord is defective, use a multimeter to test it for the cord for power. If the power cord is not getting power, replace it.

Parts
Power Cord for your FrigidaireWashing Machine
Add to Cart
Install Help