• 1-800-269-2609
  • En Español
  • Available 7 days a week

Amana Washer Won't Spin or Agitate

NAV5800AWW

The part(s) or condition(s) listed below for the symptom Washer won't spin or agitate are ordered from most likely to least likely to occur. Check or test each item, starting with the items at the top of the page.

Most Frequent Causes for Washer won't spin or agitate

Cause 1Drive Belt

Inspect the drive belt to determine if it is broken or if it is loose on the pulleys. If the drive belt is broken or loose, replace it.

Parts
Drive Belt for your AmanaWashing Machine
Drive Belt - Part # 964125 Mfg Part # WP27001006

Belt length 28 3/4”, width 1/2”, characteristics, small “v”- shaped for, three-speed washer

Add to Cart
Cause 2Lid Switch Assembly

The lid switch assembly prevents the washer from spinning when the lid is open. If the lid switch assembly fails, the washer will not spin. To determine if the lid switch assembly is defective, use a multimeter to test the lid switch for continuity. If the lid switch does not have continuity, replace it.

Part Testing
Parts
Lid Switch Assembly for your AmanaWashing Machine
Lid Switch Assembly - Part # 1023603 Mfg Part # WP27001095
Add to Cart
Cause 3Drive Motor

The drive motor might be defective. However, the drive motor is rarely at fault for this symptom. Before replacing the drive motor, first check all of the more commonly defective washer components. If none of those components are defective, consider replacing the drive motor. To determine if the drive motor is defective, first ensure that the motor is getting power. If the drive motor hums but doesn’t run, is noisy, or does not turn freely, replace it.

Parts
Drive Motor for your AmanaWashing Machine
Drive Motor - Part # 1055092 Mfg Part # WP27001215

Drive motor assembly with pulley, 2 speed

Add to Cart