• 1-800-269-2609
  • En Español
  • Available 7 days a week

Roper Washer Won't Spin or Agitate

RAB4132HQ0

The part(s) or condition(s) listed below for the symptom Washer won't spin or agitate are ordered from most likely to least likely to occur. Check or test each item, starting with the items at the top of the page.

Most Frequent Causes for Washer won't spin or agitate

Cause 1Motor Coupling

The motor coupling connects the motor to the washer transmission. If the washer is overloaded, the motor coupling will fail in order to protect both the motor and transmission. The motor coupling can also fail due to normal wear. Inspect the motor coupling to determine if it is broken. If the motor coupling is broken, replace it.

Parts
Motor Coupling for your RoperWashing Machine
Motor Coupling - Part # 1195967 Mfg Part # 285753A

Washer drive motor coupler. New style with metal sleeves for added strength. This version replaces all previous motor coupler styles and versions. For direct drive washing machines. Common symptom of failed coupler is washer will fill, not agitate or spin but will drain the water from the tub.

Add to Cart
Cause 2Lid Switch Assembly

The lid switch assembly prevents the washer from spinning when the lid is open. If the lid switch assembly fails, the washer will not spin. To determine if the lid switch assembly is defective, use a multimeter to test the lid switch for continuity. If the lid switch does not have continuity, replace it.

Part Testing
Parts
Lid Switch Assembly for your RoperWashing Machine
Lid Switch Assembly - Part # 4248251 Mfg Part # 3949247V

Washing machine lid switch assembly with wire harness. The lid switch ensures that the washer door is closed while the washer is spinning. If the lid switch is broken, the washer will not spin. If the washer won't spin but will still agitate, the lid switch is likely defective.

Add to Cart
Cause 3Drive Motor

The drive motor might be defective. However, the drive motor is rarely at fault for this symptom. Before replacing the drive motor, first check all of the more commonly defective washer components. If none of those components are defective, consider replacing the drive motor. To determine if the drive motor is defective, first ensure that the motor is getting power. If the drive motor hums but doesn’t run, is noisy, or does not turn freely, replace it.

Parts
Drive Motor for your RoperWashing Machine
Drive Motor - Part # 675936 Mfg Part # WP661600

Washing machine drive motor, 2 speed. If your drive motor is defective, the washer won't spin, agitate, or drain.

Add to Cart
Install Help
Cause 4Transmission

The washer transmission might be worn out or defective. Transmissions have gears in them that can fail causing the washer to not spin or agitate. However, this is almost never the case. Before replacing the transmission, first check all of the other components in this troubleshooting guide. If the motor is turning the transmission, but the washer won’t spin or agitate, consider replacing the transmission.

Parts
Transmission for your RoperWashing Machine
Transmission - Part # 423 Mfg Part # 3360629

Transmission (gearbox) for direct-drive washing machines. If the gears inside the transmission are worn out, the washer may not spin.

Add to Cart
Install Help
Cause 5Transmission

The washer transmission might be worn out or defective. Transmissions have gears in them that can fail causing the washer to not spin or agitate. However, this is almost never the case. Before replacing the transmission, first check all of the other components in this troubleshooting guide. If the motor is turning the transmission, but the washer won’t spin or agitate, consider replacing the transmission.

Parts
Transmission for your RoperWashing Machine
Transmission - Part # 470758 Mfg Part # 285515

Gearcase housing kit with main drive gear