• 1-800-269-2609
  • En Español
  • Available 7 days a week

Maytag Washer Door or Lid Won't Lock

MAH3000AWW

The part(s) or condition(s) listed below for the symptom Washer door or lid won't lock are ordered from most likely to least likely to occur. Check or test each item, starting with the items at the top of the page.

Most Frequent Causes for Washer door or lid won't lock

Cause 1Door Latch

The door latch assembly might be defective. Inspect the door latch for damage. If the door latch is damaged, replace it.

Parts
Door Latch for your MaytagWashing Machine
Door Latch - Part # 824665 Mfg Part # 22003467

Latch Assy is no longer available as a complete assy. Must replacement component within assembly.

Cause 2Door Latch

The door latch assembly might be defective. Inspect the door latch for damage. If the door latch is damaged, replace it.

Parts
Door Latch for your MaytagWashing Machine
Add to Cart
Cause 3Main Control Board

The main control board may be defective. However, this is rarely the case. Before replacing the main control board, first check all of the components of the lock mechanism. If none of these parts are defective, consider replacing the main control board.

Parts
Main Control Board for your MaytagWashing Machine
Main Control Board - Part # 824584 Mfg Part # 12001725

Machine control board kit, MAH3000 prior to series 17. *Burned resistor on board indicates another problem within the machine

Add to Cart
Cause 4Main Control Board

The main control board may be defective. However, this is rarely the case. Before replacing the main control board, first check all of the components of the lock mechanism. If none of these parts are defective, consider replacing the main control board.

Parts
Main Control Board for your MaytagWashing Machine
Main Control Board - Part # 4431435 Mfg Part # WP22002988

Machine control board kit, MAH3000 series 17 & afte

Add to Cart