• 1-800-269-2609
  • En Español
  • Available 7 days a week

Kenmore Washer Door or Lid Won't Lock

110.47761800

The part(s) or condition(s) listed below for the symptom Washer door or lid won't lock are ordered from most likely to least likely to occur. Check or test each item, starting with the items at the top of the page.

Most Frequent Causes for Washer door or lid won't lock

Cause 1Door Lock

The door lock assembly might be defective. Inspect the door lock for damage. If the door lock is damaged, replace it.

Parts
Door Lock for your KenmoreWashing Machine
Door Lock - Part # 1515091 Mfg Part # WPW10253483
Add to Cart
Cause 2Door Strike

Inspect the door strike assembly for damage. If the door strike is broken, replace it. The door strike is not repairable—if it is broken, you must replace it.

Parts
Door Strike for your KenmoreWashing Machine
Door Strike - Part # 1482407 Mfg Part # WPW10217552
Add to Cart
Install Help
Cause 3Main Control Board

The main control board may be defective. However, this is rarely the case. Before replacing the main control board, first check all of the components of the lock mechanism. If none of these parts are defective, consider replacing the main control board.

Parts
Main Control Board for your KenmoreWashing Machine
Main Control Board - Part # 1454553 Mfg Part # WPW10156258

Main Control Board. NOTE: This part is often misdiagnosed and requires electrical testing with a volt/ohm meter to determine if it is defective.

Add to Cart
Cause 4Main Control Board

The main control board may be defective. However, this is rarely the case. Before replacing the main control board, first check all of the components of the lock mechanism. If none of these parts are defective, consider replacing the main control board.

Parts
Main Control Board for your KenmoreWashing Machine
Main Control Board - Part # 1454978 Mfg Part # W10163334

Control board

*Per the manufacturer both the center and right user interface controls must be replaced together. Use part number off the right control to correctly identify the kit

Cause 5Main Control Board

The main control board may be defective. However, this is rarely the case. Before replacing the main control board, first check all of the components of the lock mechanism. If none of these parts are defective, consider replacing the main control board.

Parts
Main Control Board for your KenmoreWashing Machine
Cause 6Main Control Board

The main control board may be defective. However, this is rarely the case. Before replacing the main control board, first check all of the components of the lock mechanism. If none of these parts are defective, consider replacing the main control board.

Parts
Main Control Board for your KenmoreWashing Machine
Add to Cart