• 1-800-269-2609
  • En Español
  • Available 7 days a week

LG Washer Stops Mid Cycle

WM2077CW/01

The part(s) or condition(s) listed below for the symptom Washer stops mid cycle are ordered from most likely to least likely to occur. Check or test each item, starting with the items at the top of the page.

Most Frequent Causes for Washer stops mid cycle

Cause 1Water Inlet Valve

During the rinse cycle, the water inlet valve opens to allow water to enter the wash tub. If the water inlet valve fails, the washer will continue waiting for the water to enter the washer, causing it to stop mid-cycle. To determine if the water inlet valve is defective, use a multimeter to test it for continuity. If the water inlet valve does not have continuity, replace it.

Part Testing
Parts
Water Inlet Valve for your LGWashing Machine
Water Inlet Valve - Part # 1268123 Mfg Part # 5220FR2006H

Washer hot water inlet valve. Standard hose fitting inlet, 1 water outlet. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all.

Add to Cart
Install Help
Cause 2Water Inlet Valve

During the rinse cycle, the water inlet valve opens to allow water to enter the wash tub. If the water inlet valve fails, the washer will continue waiting for the water to enter the washer, causing it to stop mid-cycle. To determine if the water inlet valve is defective, use a multimeter to test it for continuity. If the water inlet valve does not have continuity, replace it.

Part Testing
Parts
Water Inlet Valve for your LGWashing Machine
Water Inlet Valve - Part # 4322702 Mfg Part # 5220FR2075L

Washer cold water inlet valve assembly. Three solenoids

Add to Cart
Install Help