Lower dishrack roller assembly, gray, (4) required to replace them all. Sold individually
Dishrack adjuster arm. Fits both left and right side. Allows the upper rack to be raised and lowered to accomadate different size dishes.
Dryer drum drive belt. The belt is flat, 92-1/4 inches long, 1/4 inch wide and has 4 ribs and 3 grooves. It replaces many other belts, including some with 5 ribs and 4 grooves. If the drum does not turn, but you can hear the motor running then there is a good chance the belt has broken.
Dishwasher upper rack adjuster kit. This kit includes both left and right side adjusters and all components needed to service the upper rack. The part has changed from plastic to metal. So it will look different than the original part. Instructions available online at Servicematters.com.
Lower dishrack roller assembly, gray, sold individually you will need (4) roller assemblys to replace them all.
Upper dishrack stop clip, Gray
Dryer gas burner valve solenoid set. If the dryer does not heat or heats intermittently the coils could be defective. To test, watch the burner and if the igniter glows for a while and then shuts off without the gas igniting, it usually means one of these coils is bad.
Dishwasher bottom door gasket and deflector strip. If the dishwasher is leaking the gasket may be damaged.
Lower Spray Arm
Upper dishrack stop clip
Dishwasher upper mounting bracket. Screws sold seprately. Please see related items below.
Dishwasher door latch and handle assembly, black. The front of handle is a 1/2 inch wide. If the dishwasher won't start then the latch assembly could be defective.
*The white handle has been discontinued.
Dishwasher door gasket (or door seal). This door gasket creates a seal around the dishwasher to prevent water from leaking out. If the gasket is torn, the dishwasher will leak water.
Dryer door catch kit. This kit includes three different door catches; you will need to select the door catch that fits your model.
Dishwasher tine pivot clip. Holds the fold down tine to the upper rack.