Electrolux Washing Machine Parts

Washing machine shock absorber kit. The shock absorbers dampen the vibration of the washer tub. If one or more of the shock absorbers are worn out, the washer will vibrate or shake.

OEM Part - Manufacturer #5304485917

Washer drive belt. If this belt is broken, the washer will not spin or agitate.

OEM Part - Manufacturer #134511600

The tension pulley may also be worn.

Washing machine drain pump. On some models you will need to configure the replacement pump to match the old pumps outlet port direction and reuse the old mounting bracket. If the washer does not drain then the drain pump may be clogged, damaged, or defective.

OEM Part - Manufacturer #137221600

Washer door strike. If the washing machine won't start, inpsect the actuator for damage. If the actuator is damaged the door will not latch properly and the washer will not turn on.

OEM Part - Manufacturer #131763302

Leveling leg

OEM Part - Manufacturer #134548800

Complete strike assembly

OEM Part - Manufacturer #134937300

Washer water inlet valve with thermistor. If the washer fills slowly or does not fill at all, then the water valve may be restricted and require replacement.

OEM Part - Manufacturer #134371220

Consider replacing your old fill hoses while you are installing the new valve.

Washing machine door hinge.

OEM Part - Manufacturer #134550800

If your washing machine has a moldy or musty odor, we recommend cleaning it with Affresh washing machine cleaner.

Washing machine belt tension pulley assembly

OEM Part - Manufacturer #131862900

Retaining ring with spring for boot seal.

OEM Part - Manufacturer #134527100

Washing machine main tub seal assembly. If the washer leaks then the tub seal may be bad.

OEM Part - Manufacturer #5303279394

If the seal leaked then water likely got onto the tub bearing which should be replaced while you have the washer apart.

Universal washing machine water supply hose set. Includes 2 extra strong 6 foot braided stainless steel hoses with hose washers already installed. It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.

OEM Part - Manufacturer #5304490736

Washer motor control board. This part contains the board, bracket, tape and screw mounted on control. NOTE: This part is often misdiagnosed. Please enter your appliance model# into our Repair Help section for additional repair help.

OEM Part - Manufacturer #134743500