Make Selection Here:
RepairClinic Item # 1195967
Washer drive motor coupler. New style with metal sleeves for added strength. This version replaces all previous motor coupler styles and versions. For direct drive washing machines. Common symptom of failed coupler is washer will fill, not agitate or spin but will drain the water from the tub.
OEM Part - Manufacturer #285753A
RepairClinic Item # 2744
Washing machine agitator repair kit with a medium length cam (there are other kits available for different models). This kit should be used when the top part of the agitator is not moving properly but the bottom part is.
OEM Part - Manufacturer #285811
RepairClinic Item # 4248251
Washing machine lid switch assembly with wire harness. The lid switch ensures that the washer door is closed while the washer is spinning. If the lid switch is broken, the washer will not spin. If the washer won't spin but will still agitate, the lid switch is likely defective.
OEM Part - Manufacturer #3949247V
RepairClinic Item # 3296
Washing machine drain pump. The pump mounts directly to the motor with two clips. If the washer does not drain then the pump could be locked up or a small object may be clogging it. A small leak in front of the washer could be caused by a defective pump.
OEM Part - Manufacturer #WP3363394
RepairClinic Item # 2670
Washing machine clutch assembly with hardware. *Blue spring for large capacity washers, black for compacts. A worn clutch often causes a slower spin speed which leaves the clothes soaked after the cycle.
OEM Part - Manufacturer #285785
RepairClinic Item # 1938607
Washer lid lock latch kit. Includes the lock latch assembly, one white and one gray lid lock bezel & instructions. Lid must be closed for washer to fill, wash, drain, or spin. If the washing machine is not advancing into the cycle or is displaying a lid lock fault this may be the cause of the issue.
OEM Part - Manufacturer #W10404050
RepairClinic Item # 1373065
Affresh™ Washing machine cleaner. This cleaner removes and prevents odor-causing residue in all brands of washers. To use, add one tablet to washer with no clothes and select hot water.
- Septic safe
- More effective than bleach.
- Three tablets per package.
OEM Part - Manufacturer #W10135699
RepairClinic Item # 868761
Washing machine water inlet valve kit with bracket. A long or slow fill cycle is often due to a restricted water valve. The valve should never be disassembled and cleaned, only replaced.
OEM Part - Manufacturer #285805
RepairClinic Item # 1021707
Spanner nut wrench for many Whirlpool, Kenmore, General Electric & Maytag inner tub lock nuts
Aftermarket (Non-OEM) Part - Manufacturer #TB123A
RepairClinic Item # 671098
Washing machine suspension spring. If the suspension spring is broken, the washer will be off balance.
OEM Part - Manufacturer #WP63907
RepairClinic Item # 1719787
Washing machine mode shift actuator. The actuator serves several functions. It has a synchronous motor that shifts the splutch cam ring and monitors the position of the splutch. It also houses a transmission speed/position optical sensor.
OEM Part - Manufacturer #WPW10006355
RepairClinic Item # 1018522
Direct drive washer lid switch assembly, If the washing machine does not spin the lid switch may have failed.
OEM Part - Manufacturer #WP8318084
RepairClinic Item # 1531974
Washing machine door lock and switch assembly for front loading washers. If the washer will not start, the door lock may be defective.
OEM Part - Manufacturer #131763202
RepairClinic Item # 597440
OEM Part - Manufacturer #WP489483
RepairClinic Item # 1549326
Washing machine tub counterbalance spring. This spring offsets the weight of the motor on the front of the washer. If broke, the tub will lean forward and the tub will be off balance during the spin cycle.
OEM Part - Manufacturer #WPW10250667
RepairClinic Item # 1191142
Washer door strike for latch in white. If the washing machine does not start, look for a damaged actuator on the door. If the actuator is broke the washer will not start because it is unable to latch the door properly.
OEM Part - Manufacturer #134456600
RepairClinic Item # 4185114
Washing machine tub suspension rod kit,. Set of 4 rods, 4 suspension balls and 4 bushings. The suspension rods help to dampen the movement of the washer tub. If one or more of the suspension rods are broken, the washer will vibrate or shake.
OEM Part - Manufacturer #W10780048
RepairClinic Item # 1032664
Door strike/catch for front-loading washing machine. The washer door must be latched shut in order for the washer to start. If the door strike is damaged or defective, the washer door won't latch, and the washer will not be able to start.
OEM Part - Manufacturer #131763310
RepairClinic Item # 1871380
Washer main drive belt. This belt is located under the washing machine and is used to drive the splutch pulley. It goes around the motor & splutch pulleys. Worn or broken drive belt can cause spin or washplate problems.
OEM Part - Manufacturer #WPW10006384
RepairClinic Item # 1202371
Adjustable leveling leg for washing machine. This leveling leg has a rubber foot. If the leveling leg is not adjusted properly, the washer will be off-balance and will vibrate or shake during operation.
OEM Part - Manufacturer #WPW10001130
RepairClinic Item # 470910
Washing Machine agitator repair kit. Includes short cam. The teeth on the dog ears often wear out and cause the top of the agitator not to work properly.
OEM Part - Manufacturer #285809
RepairClinic Item # 485585
OEM Part - Manufacturer #WP308685
RepairClinic Item # 539455
Washer agitator bolt with rubber gasket and thread sealant. Head is 7/16 inches in diameter.
OEM Part - Manufacturer #WP358237
RepairClinic Item # 1318
Washing machine drive belt. 51 1/8" long and 3/8" wide. Medium v- shaped. If the motor runs, but the washer won't agitate, spin, or drain, the drive belt is likely broken or worn out.
OEM Part - Manufacturer #WP21352320
RepairClinic Item # 1477
Washing machine lid hinge.
OEM Part - Manufacturer #WP35-2044
RepairClinic Item # 1938554
Tub centering spring
OEM Part - Manufacturer #W10400895
RepairClinic Item # 2220542
Washing machine shock absorber kit. The shock absorbers dampen the vibration of the washer tub. If one or more of the shock absorbers are worn out, the washer will vibrate or shake.
OEM Part - Manufacturer #5304485917
RepairClinic Item # 1156860
Washer drive belt. If this belt is broken, the washer will not spin or agitate.
OEM Part - Manufacturer #134511600
RepairClinic Item # 2837
Washing machine agitator repair kit. Includes agitator cam and 4 directional cogs (also called dog ears). If the upper section of the agitator isn't turning properly, then the agitator cam and dog ears are likely worn-out and require replacement.
OEM Part - Manufacturer #285751
RepairClinic Item # 185
White touch-up paint
OEM Part - Manufacturer #72017
RepairClinic Item # 1638900
Faucet adapter for portable dishwasher or washer
OEM Part - Manufacturer #WPW10254672
RepairClinic Item # 4248250
Washing machine main tub seal
OEM Part - Manufacturer #W10814296
RepairClinic Item # 3319979
Drive Splutch Kit. This kit has 6 parts; a spring, housing, cam ring, basket drive gear, pulley, and nut. The pulley is driven by the drive belt and the splutch works with the mode shift actuator to operate the washplate and spin the inner basket. A worn splutch can cause spin or washplate problems.
OEM Part - Manufacturer #W10721967
RepairClinic Item # 2858
Washer drive block for inner tub. A worn drive block may cause the washer to spin slowly, causing the clothes to be soaked at the end of the cycle. The washer may also make a loud knocking noise at the beginning of the spin cycle.
OEM Part - Manufacturer #WP389140
RepairClinic Item # 1480998
Water inlet valve and inlet assembly with thermistor for water temp sensing. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all.
OEM Part - Manufacturer #WPW10144820
RepairClinic Item # 1453
Washing machine lid hinge pin.
OEM Part - Manufacturer #WP35-2045
RepairClinic Item # 1873013
White washer lid strike assembly. The strike is what the lid lock hooks onto to lock the washing machine lid. If the washing machine is not advancing into the cycle or is displaying a lid lock fault this may be the cause of the issue.
OEM Part - Manufacturer #WPW10240513
RepairClinic Item # 2978
Washing machine tub suspension pads (package of 3). These pads help to absorb the movement of the washer tub. If a tub pad is worn, the washing machine will be unbalanced and will vibrate or shake during the spin cycle.
OEM Part - Manufacturer #285744
RepairClinic Item # 436917
Washer suspension spring. The suspension springs help to absorb the movements of the washer tub. If a suspension spring breaks, the tub will become unbalanced and will vibrate or shake during operation.
OEM Part - Manufacturer #WP21001598
RepairClinic Item # 2754548
Washing machine drain pump. On some models you will need to configure the replacement pump to match the old pumps outlet port direction and reuse the old mounting bracket. If the washer does not drain then the drain pump may be clogged, damaged, or defective.
OEM Part - Manufacturer #137221600
RepairClinic Item # 4282122
Fabric softener dispenser
OEM Part - Manufacturer #W10740584
RepairClinic Item # 1515007
OEM Part - Manufacturer #201566P
RepairClinic Item # 2921
Washing Machine Agitator repair kit with reversing dog ears and, long cam, and retainer. If the upper section of the agitator does not work then the cam and dog ears are likely worn and require replacement.
OEM Part - Manufacturer #285748
RepairClinic Item # 1000
Retainer snap ring
OEM Part - Manufacturer #WP23748
RepairClinic Item # 3400
5-foot-long rubber fill hose for washing machines. Used for hot or cold water.
OEM Part - Manufacturer #WP89503
RepairClinic Item # 1480289
Washing machine drain pump assembly. This pump is driven by the main drive belt that also drives the transmission pulley. If the washer does not drain the pump could be locked up or a small object may be clogging it. Also a small leak in front of the washer could be caused by a defective pump.
OEM Part - Manufacturer #WP35-6465
RepairClinic Item # 1378530
Three terminal door switch kit. Be aware that this switch replaces older 2 terminal switches.
OEM Part - Manufacturer #W10169313
RepairClinic Item # 839
Black appliance touch-up paint.
OEM Part - Manufacturer #72032
RepairClinic Item # 547639
Thrust spacer for washer agitator.
OEM Part - Manufacturer #WP3951608