Washer tub dampening strap. If the washing machine tub is off-balance, then one or more of these straps may have broken.
Control knob assembly in white. This knob is used on both washing machines and dryers. For models GTDP180ED and GTDX180ED, you will need to use part number WE01X20374 instead.
Washing machine agitator assembly.
Washer or dryer selector switch knob with clip in white.
Washer drive belt. The new belt will seem too small during installation. However, it will stretch and we offer a belt tool to help.
Selector knob, white
Washing machine drain pump assembly. The drain pump pushes water through the drain hose during the drain cycle. If the drain pump is clogged, damaged, or defective, the washer won't drain properly.
Lid lock striker
Washing machine main tub seal. If the washer leaks around the center shaft then the main tub seal is likely defective.
Drain pump assembly
Washing machine main tub bearing. Located at bottom of outer tub. The tub bearing helps to keep the inner tub spinning smoothly.
Lid switch and wire harness assembly. The lid switch assembly prevents the washer from spinning if the lid is open. If the washer won't spin, but will agitate, the lid switch might be defective.
Washing machine corrugated drain hose, 4-1/2 feet. If the drain hose is cracked, it will leak water during the washer's drain cycle.
Washing machine agitator drive bell (also called the coupler). The drive bell connects the transmission drive shaft to the agitator base.