Microwave incandescent light bulb, 40 Watt. Comes with small screw in base. If the light bulb threads are corroded, or the bulb base is too large, the socket may also need to be replaced.
40 Watt frosted appliance light bulb.
Chrome drip bowl (also called a drip pan) for 8 inch burner on an electric range. The drip pan sits underneath the heating element to collect drips or spills around the burner.
Chrome drip bowl for 6" burner, electric range. Will not fit Thermador, GE, Hotpoint or Jenn Air
Surface element control switch (also called the infinite switch) for 8 inch element. The surface element switch sends voltage to the surface element coil. If the switch is defective, the surface element will not work.
25 watt light-bulb for various appliances, 120 volts, small base screw-in. Bulb has been updated and you may need the recommended socket to install this light bulb. Also bulb is no longer blue tint per factory.
Oven igniter. The igniter draws electrical current through the oven safety valve to open it. If the igniter glows for more than 90 seconds without igniting the gas flame, this indicates that the igniter is too weak to open the valve.
Torx screw, 7-18 x 3/4"
Chrome drip bowl (also called a drip pan) for 6 inch burner on an electric range. The drip pan sits underneath the heating element to collect drips or spills around the burner.
White silicone adhesive caulk. Forms a heat resistant bond. Often used for gaskets, seals and burner grate feet.
Stove top receptacle kit for electric stove surface elements. If the heating element operates intermittently then this terminal block or the elements terminals are likely corroded and both may need to be replaced.
Oven bake element. If the oven won't heat, the bake element may have burned out. Often, if the bake element has burned out, it will be visibly damaged. Inspect the bake element for holes or blisters.
White touch-up paint. .6 oz.
8-inch diameter plug-in surface heating element with looped terminal ends. 5 turn. 2600 Watt. If your surface element won't heat, either the surface element or the surface element switch may be defective. To determine if the surface element is defective, use a multimeter to test it for continuity.
Oven BAKE burner spark electrode, gas oven with Direct Spark Ignition (DSI)