40 Watt frosted appliance light bulb.
Oven ignitor, this item is also referred to as a glow bar. The igniter is mounted vertically on the burner tube. If the oven does not heat check if the igniter is glowing, if so then there is a good chance the igniter is weak and will need repalcement.
25 watt light-bulb for various appliances, 120 volts, small base screw-in. Bulb has been updated and you may need the recommended socket to install this light bulb. Also bulb is no longer blue tint per factory.
Range leveling leg, black plastic. This leg may be shorter than the original but is the factory replacement. Longer leg is not available.
Oven bake element with push-on terminal ends. It is not unusual for a bake element to short out and arc in one spot. If this occurs, disconnect the power to the stove until the element has been replaced.
Grate Bumper. Adhesive required to hold foot in place. See required parts below.
Grease filter measures approximately 13 3/8 by 5 7/8
Light bulb, 10 watt. Small screw in base
Stainless control knob
Sealed gas burner head assembly, 1 BLACK burner head with spark electrode. Rotate assembly counter clockwise to release burner from the main top. *No gasket seal required per manufacturer.
Anti-tip bracket for freestanding range
Terminal block for main power supply or cord. Nuts not included.
Oven sensor kit, short 3" long