40 Watt frosted appliance light bulb.
Chrome drip bowl for 6-inch electric coil burner. This drip bowl sits underneath the burner to catch drips or spills.
Chrome drip bowl (also called a drip pan) for 8-inch burner. The drip pan sits underneath the heating element to collect drips or spills around the burner.
Chrome drip bowl (also called a drip pan) for 8 inch burner on an electric range. The drip pan sits underneath the heating element to collect drips or spills around the burner.
Oven igniter assembly. Short ceramic style igniter with mounting bracket and wire nuts for installation. Overall length is 3.72", amperage range 3.2 to 3.6. The igniter is the most commonly defective part for a gas oven not heating correctly or at all.
Chrome drip bowl (also called a drip pan) for 6 inch burner on an electric range. The drip pan sits underneath the heating element to collect drips or spills around the burner.
Oven igniter kit. Can replace igniters for either bake or broil burners. Replaces shorter and longer igniters in many instances. Amperage range is 3.3 - 3.6. If the igniter glows for more than 90 seconds without igniting the gas flame, this indicates that the igniter is too weak to open the valve.
Stove top surface element terminal block kit with interchangeable mounting brackets. The kit also includes ceramic wire nuts, heat shrink protective tubing, and wires. If the element works intermittently then the receptacle may be making poor contact with the element and needs replacement.
25 watt light-bulb for various appliances, 120 volts, small base screw-in. Bulb has been updated and you may need the recommended socket to install this light bulb. Also bulb is no longer blue tint per factory.
Light bulb 40 watt 120 volt medium standard base. Used in many refrigerators and ranges.
Front glide for oven drawer. Requires (2) one for each side. For the rear glides see related parts below.
Rear glide for oven lower storage drawer.
Stove top coil surface heating element, 8 inch. If the element does not heat either it or the control switch is defective. The coil can be tested to determine if it is at fault.
Sealed gas burner head assembly, 1 BLACK burner head with spark electrode. Rotate assembly counter clockwise to release burner from the main top. *No gasket seal required per manufacturer.