Oven igniter assembly. Short ceramic style igniter with mounting bracket and wire nuts for installation. Amperage range is 3.3 to 3.6. *Connector may need to be cut off and wires spliced to range wiring with porcelain wire nuts.
Oven bake heating element. Push-on wire terminals. Includes feet for sitting on bottom of oven floor, and mounting plate for attaching to back wall of oven. Often, if the heating element has burned out, it will be visibly damaged. Inspect the heating element for holes or blisters.
Burner drip bowl (also called a drip pan) for 6-inch burner. The drip pan sits underneath the heating element to collect drips or spills around the burner.
Burner drip bowl (or drip pan) for 8-inch burner. The drip pan sits underneath the heating element to collect drips or spills around the burner.
Light bulb, pack of 2
Burner drip bowl for 6-inch burner, black. The drip bowl sits underneath the burner to catch drips or spills.
Stove top heating element terminal block kit (receptacle). If the heating element operates intermittently then this terminal block or the elements terminals are likely corroded and both will likely need to be replaced.
Burner drip bowl for 8-inch burner. This drip bowl sits underneath the burner to catch drips or spills.
Oven thermostat assembly. If the oven does not heat or the temperature is off by more than 50 degrees than the oven thermostat may be defective.
Range anti-tip bracket. This bracket helps to secure the range and prevent it from tipping over.
Stove top double surface burner kit.
Broiler pan grill kit, porcelain, includes grill and bottom pan
Oven thermostat assembly. This thermostat monitors the temperature inside the oven and cycles on the heat when the oven drops below a set temperature. If the oven does not bake, or if the oven temperature is off by more than 50 degrees Fahrenheit, the oven thermostat may be defective,