Stove top surface element terminal block kit with interchangeable mounting brackets. The kit also includes ceramic wire nuts, heat shrink protective tubing, and wires. If the element works intermittently then the receptacle may be making poor contact with the element and needs replacement.
Oven bake or broil igniter, 2.5 to 3.0 Amp. The igniter draws electrical current through the oven safety valve to open it. If the igniter glows for more than 90 seconds without igniting the gas flame, this indicates that the igniter is too weak to open the valve. (NOTE: This part is very fragile.)
Light bulb 40watt 120volt meduim standard base. Used in many refrigerators and ranges.
Oven bake heating element with screw-on terminals. The element is 18-1/4 inches wide, 14-1/2 inches deep to mounting flange. Terminal ends extend 2-1/2 inches past flange. 2,300 watts at 220 volts. If the oven does not heat the bake element may have burned out.
Secondary microwave door switch. Switch contacts are normally open
Appliance light bulbs (2 pack).
Door switch, monitor (normally closed)
Window pack assembly
Chrome drip bowl (pan) for 8-inch burner on electric range. This drip bowl sits underneath the heating element to catch drips or spills.
Oven temperature sensor assembly. The oven sensor works in conjunction with the oven control board to regulate the oven temperature. If the oven sensor is defective, the oven temperature will be inaccurate.
Chrome drip bowl for 6-inch burner on electric range. This drip bowl sits underneath the burner to catch drips or spills.
Oven door gasket with mounting clips.
Stove top double surface burner kit.