Microwave incandescent light bulb, 40 Watt. Comes with small screw in base. If the light bulb threads are corroded, or the bulb base is too large, the socket may also need to be replaced.
40 Watt frosted appliance light bulb.
Chrome drip bowl (also called a drip pan) for 8 inch burner on an electric range. The drip pan sits underneath the heating element to collect drips or spills around the burner.
Chrome drip bowl for 6" burner, electric range. Will not fit Thermador, GE, Hotpoint or Jenn Air
Stove top receptacle kit for electric stove surface elements. If the heating element operates intermittently then this terminal block or the elements terminals are likely corroded and both may need to be replaced.
Chrome drip bowl (also called a drip pan) for 6 inch burner on an electric range. The drip pan sits underneath the heating element to collect drips or spills around the burner.
25 watt light-bulb for various appliances, 120 volts, small base screw-in. Bulb has been updated and you may need the recommended socket to install this light bulb. Also bulb is no longer blue tint per factory.
Light bulb 40watt 120volt meduim standard base. Used in many refrigerators and ranges.
White silicone adhesive caulk. Forms a heat resistant bond. Often used for gaskets, seals and burner grate feet.
8-inch diameter plug-in surface heating element with looped terminal ends. 5 turn. 2600 Watt. If your surface element won't heat, either the surface element or the surface element switch may be defective. To determine if the surface element is defective, use a multimeter to test it for continuity.
Terminal block for main power supply or cord. Nuts not included.
Surface coil element replacement kit, 2 eight inch elements, 2 six inch elements, four receptacles and related hardware. If the terminal blocks and surface elements on your stove top are in bad shape this is the perfect kit to refresh the appliance.
Control knob, black
Oven igniter assembly. You must reuse the bracket from original igniter. If the oven does not heat check if the igniter is glowing, if so then there is a good chance the igniter is weak and will need repalcement.