Oven igniter assembly. Short ceramic style igniter with mounting bracket and wire nuts for installation. Overall length is 3.72", amperage range 3.2 to 3.6. The igniter is the most commonly defective part for a gas oven not heating correctly or at all.
Oven igniter kit. Can replace igniters for either bake or broil burners. Replaces shorter and longer igniters in many instances. Amperage range is 3.3 - 3.6. If the igniter glows for more than 90 seconds without igniting the gas flame, this indicates that the igniter is too weak to open the valve.
Oven bake or broil igniter, 2.5 to 3.0 Amp. The igniter draws electrical current through the oven safety valve to open it. If the igniter glows for more than 90 seconds without igniting the gas flame, this indicates that the igniter is too weak to open the valve. (NOTE: This part is very fragile.)
Oven igniter assembly. You must reuse the bracket from original igniter. If the oven does not heat check if the igniter is glowing, if so then there is a good chance the igniter is weak and will need repalcement.
Broiler igniter assembly with bracket and wires, amperage range 3.2 - 3.6
Oven igniter assembly with wire connector
Ignitor, no bracket or connector- reuse old bracket, make connections with ceramic wire nuts.