MTD Spark Plug. The spark plug ignites the fuel and air mixture in the cylinder to power the engine. If the spark plug is burnt, fouled or damaged the engine may not start or may run rough.
Tecumseh carburetor outlet gasket.
Small engine recoil starter assembly. This item includes the pulley and spring. The recoil starter engages the drive cup on the flywheel to start the engine when pulled.
Carburetor needle & seat kit. Comes with installation instructions. The float needle allows fuel to enter the float bowl. If the float needle is stuck closed, the engine will not get fuel and thus will not start.
Shear pin. Shear pins are designed to break in half if the auger strikes a hard object to prevent damage to the transmission and engine. If the shear pin is broken, the auger won’t be able to turn.The retaining clip is not included—you must purchase it separately to complete the assembly.
Briggs & Stratton in-line fuel filter. If the fuel filter is clogged, it will restrict the flow of fuel to the carburetor. As a result, the engine may not start.
Honda insulator gasket.
Husqvarna hex head blade bolt. 3/8-24 x 1 -3/8.
Fuel filter & fuel line kit. If the fuel filter and fuel line are clogged, they will restrict the flow of fuel to the carburetor. As a result, the engine may not start.
Tecumseh ignition coil (also called a lamination). The ignition coil sends voltage to the spark plug while the engine is running. If the ignition coil is defective, the engine may not start.
Snow blower clutch cable 47.48". The clutch cable engages the snow blower's auger. If the cable is broken, the auger won't turn.
Tecumseh carburetor bowl gasket. If this gasket is torn or damaged, the engine may run rough. Be sure to clean the surfaces around the carburetor gasket before installing it.
Fuel bowl gasket
Self-tapping screw. 5/16-18 hex head.