Troy-Bilt Snowblower Parts

Self-tapping screw. 5/16-18 hex head.

Genuine OEM Part - Manufacturer #710-1260A

Shear pin. Shear pins are designed to break in half if the auger strikes a hard object to prevent damage to the transmission and engine. If the shear pin is broken, the auger won’t be able to turn.The retaining clip is not included—you must purchase it separately to complete the assembly.

Genuine OEM Part - Manufacturer #738-04124A

To complete this assembly, purchase the retaining kit.

Self-tapping screw. 5/16-18 inches by .75 inches.

Genuine OEM Part - Manufacturer #710-04484

Snow blower auger shear pin kit. The kit contains four shear pins and retainers.

Genuine OEM Part - Manufacturer #OEM-738-04124

Carriage Bolt: 5/16-18 x .750"

Genuine OEM Part - Manufacturer #710-0451

MTD flange lock nut, 5/16-18.

Genuine OEM Part - Manufacturer #712-04063

Snow blower slide shoe in black. 3" W x 4 3/4"L

Genuine OEM Part - Manufacturer #784-5580-0637

See recommended related item for a package of two slide shoes.

MTD Spark Plug. The spark plug ignites the fuel and air mixture in the engine's cylinder to power the engine. If the spark plug is has fouled (if the tip of the spark plug is burnt or damaged), the engine may not start or may run rough.

Genuine OEM Part - Manufacturer #951-10292

Fuel bowl gasket

Genuine OEM Part - Manufacturer #951-11589

Snow blower V belt. This belt drives the pulley for the ground drive transmission. If the self-propel feature does not work, this belt may be worn.

Genuine OEM Part - Manufacturer #954-04050A

Snow blower auger drive belt. This is a set of two belts. 3/8" X 35". If the snow blower auger does not engage properly, then the auger belts may be worn and will need to be replaced.

Genuine OEM Part - Manufacturer #954-0430B

MTD flange lock-nut, 1/4-20.

Genuine OEM Part - Manufacturer #712-04064

MTD flange bushing

Genuine OEM Part - Manufacturer #741-0493A

Replacement primer bulb assembly

Genuine OEM Part - Manufacturer #951-10639A

Friction disk-rubber

Genuine OEM Part - Manufacturer #935-0243B

MTD flange lock nut, 5/8-18. This nut should be replaced if it has been removed.

Genuine OEM Part - Manufacturer #712-0417A

Genuine OEM MTD 735-04032 Snowblower Rubber Auger Segment. 4 required for a complete assembly. See recommended related item for the center segment.

Genuine OEM Part - Manufacturer #735-04032

We suggest you replace all the rubber auger segments as a complete set.

Clutch cable

Genuine OEM Part - Manufacturer #946-0898

Worm gear inside gearcase, 20 tooth for auger drive

Genuine OEM Part - Manufacturer #917-04861

Bushing

Genuine OEM Part - Manufacturer #941-0475

Flange-chute keeper

Genuine OEM Part - Manufacturer #731-0851A

Snow blower control cable for the auger assembly. If the snow thrower auger does not engage, check the cable for damage.

Genuine OEM Part - Manufacturer #946-0897

Bell washer, .340 x .872 x .060

Genuine OEM Part - Manufacturer #736-0242

Hex nut, 5/16-18

Genuine OEM Part - Manufacturer #912-3010

Carburetor gasket

Genuine OEM Part - Manufacturer #951-11569A

Small engine recoil starter assembly with snow equipment handle. The recoil starter engages the drive cup on the flywheel to start the engine.

Genuine OEM Part - Manufacturer #951-14151

Auger/axle bearing

Genuine OEM Part - Manufacturer #941-0245

Shave Plate 24"

Genuine OEM Part - Manufacturer #790-00120-0637

MTD carriage bolt, 1/4-20 x .62".

Genuine OEM Part - Manufacturer #710-0134

Bearing-ball.787id x 1.85 odx.551

Genuine OEM Part - Manufacturer #941-0919B

Snow blower clutch cable. The clutch cable engages the snow blower's auger. If the cable is broken, the auger won't turn.

Genuine OEM Part - Manufacturer #946-04230B

Primer bulb

Genuine OEM Part - Manufacturer #570682A

Carburetor gasket (Choke Side)

Genuine OEM Part - Manufacturer #951-11897

(2) Required one on each side of the choke plate

Lamp-12 volt - miniature

Genuine OEM Part - Manufacturer #925-0963

Drive belt. Width: 3/8 " Length: 30 1/4 "

Genuine OEM Part - Manufacturer #954-0346

Clean both pulleys before installing this belt.

Rubber paddle-center segment. 2 required.

Genuine OEM Part - Manufacturer #735-04033

We suggest you replace all the rubber auger segments as a complete set.

Lock nut, 3/8-16

Genuine OEM Part - Manufacturer #712-04065

Shave plate

Genuine OEM Part - Manufacturer #731-08171

Spring-extension

Genuine OEM Part - Manufacturer #932-0611

Self tapping screw, 5/16-12 x .75

Genuine OEM Part - Manufacturer #710-0726

Extension spring, .380 x 2.500

Genuine OEM Part - Manufacturer #932-0264

Headlight socket assembly

Genuine OEM Part - Manufacturer #925-1649

Plate-shave 28" black

Genuine OEM Part - Manufacturer #790-00118-0637

Screw, 1/4-20 x .5

Genuine OEM Part - Manufacturer #710-0599

Traction control cable 45"

Genuine OEM Part - Manufacturer #946-04229B

Carburetor Assembly

Genuine OEM Part - Manufacturer #951-12705

Scraper blade. See recommended related parts for attaching hardware.

Genuine OEM Part - Manufacturer #731-1033

Blade retaining bolt

Genuine OEM Part - Manufacturer #710-1044