Husqvarna fuel filter. If the fuel filter is clogged, it will restrict the flow of fuel to the carburetor. As a result, the engine may not start.
Fuel Line (Small)- 9/64 (.140) inch OD - (.080) inch ID, W/ Installation instructions.
Tecumseh carburetor repair kit. If the carburetor is clogged, the engine won't get enough fuel. As a result, the engine may not start or may run poorly.
Briggs and Strartton in-line fuel filter with 40 micron rating and 1/4" inlet & outlet. If the engine does not start then the fuel filter may be clogged and not allowing enough fuel to enter the carburetor.
Tecumseh carburetor bowl gasket. If this gasket is torn or damaged, the engine may run rough. Be sure to clean the surfaces around the carburetor gasket before installing it.
Briggs & Stratton Original Equipment 492932S Oil Filter. Length: 2 1/4 inches. For optimum performance, we recommend changing the oil in your small engine after the first five hours of use. After that, change the oil on a yearly basis or after every 50 hours of use (whichever comes first).
Briggs & Stratton in-line fuel filter. The filter screen is on the large side of the housing. The port on the large side goes to the fuel tank while the port on the small side of the housing goes to the carburetor.
Replacement Briggs & Stratton fuel line kit with clamps. 1/4 Inch inside diameter, Cut to length.
Briggs & Stratton flywheel key. The flywheel key aligns the flywheel in the correct position on the crankshaft. If the engine stops suddenly due to hitting a hard object, the flywheel key shears in half to prevent damage to the engine. If the flywheel key is broken, the engine won't start.
Tecumseh ignition coil (also called a lamination). The ignition coil sends voltage to the spark plug while the engine is running. If the ignition coil is defective, the engine may not start.
Small engine recoil starter assembly. This item includes the pulley and spring. The recoil starter engages the drive cup on the flywheel to start the engine when pulled.
Briggs & Stratton 4-Cycle Engine Oil. (48oz Bottle)
Briggs & Stratton Lawn Mower Oil is formulated for 4-cycle air-cooled engines. For optimum performance, change the oil in your small engine after the first five hours of use and then annually, or every 50 hours of use (whichever comes first).
While Snapper no longer manufacturers walk-behind snowblowers, that doesn’t mean you don’t want to keep your existing Snapper snowblower in the best condition possible. That’s why Repair Clinic stocks all the parts you need to maintain and fix your snowblower, from engine components like spark plugs, fuel and oil filters, carburetor components, and recoil start assemblies, to replacement auger blades, friction rings, discharge chute motors, and traction control cables. How do you find the right part for your equipment? Just enter the full model number of your Snapper snowblower into our website’s search bar and you’ll get a complete list of parts compatible with your model. You can then use the part category and part title filters to narrow the list down to the specific part you need. If you’re unable to locate the right part, don’t hesitate to contact our Customer Service Team for some one-on-one help. They can be reached at 1-800-269-2609.
Beyond the extensive parts selection, Repair Clinic prides itself on an unmatched collection of DIY content. You’ll find "how to” videos, articles, schematics, and diagrams to show you how to troubleshoot your snowblower problems and how to complete the repair yourself. With a little assistance from Repair Clinic, fixing all of your outdoor power equipment, heating and cooling products, and home appliances has never been easier.