Husqvarna fuel filter. If the fuel filter is clogged, it will restrict the flow of fuel to the carburetor. As a result, the engine may not start.
Bow Tie Cotter Pin
Small engine primer bulb. The primer bulb draws additional fuel into the carburetor to help start the engine.
Tecumseh carburetor repair kit. If the carburetor is clogged, the engine won't get enough fuel. As a result, the engine may not start or may run poorly.
Briggs & Stratton Spark Plug (RJ19LM). If the engine does not start or runs poorly then the spark plug may be defective and will need replacement.
Carriage Bolt: 5/16-18 x .750"
MTD flange lock nut, 5/16-18.
Tecumseh carburetor bowl gasket. If this gasket is torn or damaged, the engine may run rough. Be sure to clean the surfaces around the carburetor gasket before installing it.
Tecumseh carburetor outlet gasket.
Briggs & Stratton in-line fuel filter. The filter screen is on the large side of the housing. The port on the large side goes to the fuel tank while the port on the small side of the housing goes to the carburetor.
MTD snowblower shear bolt. If the snowblower's auger hits a hard object, the shear bolt breaks in half to prevent damage to the transmission and engine. If the shear bolt is broken, the auger won’t turn. Does not include nuts, see related item.
Briggs & Stratton flywheel key. The flywheel key aligns the flywheel in the correct position on the crankshaft. If the engine stops suddenly due to hitting a hard object, the flywheel key shears in half to prevent damage to the engine. If the flywheel key is broken, the engine won't start.
Tecumseh ignition coil (also called a lamination). The ignition coil sends voltage to the spark plug while the engine is running. If the ignition coil is defective, the engine may not start.
Air filter. If the air filter is clogged or dirty, the engine may not start or may run rough.
Lock nut with nylon insert.