40 Watt frosted appliance light bulb.
Refrigerator icemaker assembly, modular style. The new icemaker does not include a new cover, ice level arm, or wire harness, these components will need to be reused from original icemaker.
Refrigerator or freezer lower door closing cam. A new screw is needed to mount the cam. Consider lubricating the cam during installation.
Snap retaining ring
Refrigerator icemaker. This item does not include a new shut off arm. To remove the existing shut off arm from the old icemaker, lift it to the up position, unhook it from the fill cup bearing, and pull it out of the module.
Ice maker assembly with cover and wire harness. Makes 8 radius ice cubes. If the mold where cubes are made is flaking or corroded it is time for a new ice maker assembly. *Use model number to find correct icemaker.
Light/Fan switch, 3 terminal
White touch-up paint
Refrigerator door bar, white. Gallon capacity.
Refrigerator defrost timer kit. This timer is designed for continuous or cumulative run defrost systems. Turn the dial on the timer clockwise to advance it into and out of defrost.
Compressor run capacitor, 120 volts 15 mfd.
Refrigerator defrost timer, 60 hertz, 120 volts. Turn the dial on the timer clockwise to advance it into and out of defrost.
Freezer door gasket. If this gasket is worn out, cold air will leak out of the freezer, forcing the freezer to work harder to cool down. As a result, the freezer may run longer than it should, or frost may accumulate inside of the freezer.