Evaporator fan motor assembly with wire harness
Refrigerator or freezer temperature sensor (also called a thermistor). The thermistor monitors the refrigerator, freezer, and evaporator temperature and sends the temperature reading to the control board.
Refrigerator water inlet valve assembly with quick connect fitting . To disconnect the tube, push the white retainer fitting in while pulling on the tube. If the cold water is not coming out of the water dispenser, or if the ice maker won't dispense ice, the water inlet valve may be at fault.
GE MWF water filter reduces up to 94% of contaminants including lead, chlorine, and asbestos. Replace every 6 months. <br> <br> If you have never installed this new style filter or your old filter was made by Culligan you may need the adapter to install it, see Related Items below.
Refrigerator defrost heater and bracket assembly.
Auger assembly, ice dispensing bucket
Refrigerator icemaker kit, The kit includes the fill cup, 4 pin wire harness adapter, and tube. If the icemaker is not working, make sure the freezer temperature is around zero degrees Fahrenheit. If the refrigerator temperature is correct, the icemaker or water valve could be defective.
Light bulb, pack of 2
Refrigerator and freezer door handle kit with plug, white <br> These parts are not sold separately.
Water tank in refrigerator for chilled water dispenser
Refrigerator crisper drawer cover.
Refrigerator ice dispenser damper door. The crank is no longer sold with the damper door. You will have to reuse the old crank. If this door does not close properly, frost will build up around the dispenser area.
Refrigerator condenser fan motor. The condenser fan motor draws air though the condenser coils and over the compressor. If the condenser fan motor is defective, the refrigerator won’t cool properly.
Refrigerator solenoid assembly for dispenser door. If the dispenser door does not close properly frost will start to form in the dispenser area.